How To Wear AGSU Cap: Regulations, Fitting, And Maintenance Guide
Mastering how to wear the Army Green Service Uniform (AGSU) garrison or service cap requires precise alignment with Army Regulation 670-1 to ensure a sharp, professional appearance. This guide details exact tilt angles, crest placements, and sizing standards required to meet strict military inspection criteria.
Foundational Uniform Standards and Equipment Checklist
The AGSU headgear is a critical component of the United States Army's modern service uniform, reflecting the heritage of the Greatest Generation while demanding strict adherence to contemporary grooming and uniform regulations. Achieving the correct look requires precise preparation of both the physical cap and the wearer's hair, ensuring that every structural seam aligns with military bearing.
- Essential Gear and Materials: AGSU service cap (visor cap) or garrison cap, appropriate officer or enlisted branch insignia, grade insignia or U.S. collar brass, soft-bristle horsehair brush, steam iron with protective pressing cloth, and a rigid tape measure for height verification.
- Mandatory Prerequisites: Comprehensive knowledge of AR 670-1 (Wear and Appearance of Army Uniforms) and DA Pamphlet 670-1, proper haircut standards that prevent hair from protruding below the cap or touching the eyebrows, and clean hands free of oils or dirt when handling the fabric.
- Benchmarks and Timeframe: Initial fitting and crest alignment require approximately 15 to 30 minutes of careful measurement, while daily donning and adjustment take less than 60 seconds.
Step-by-Step Procedure for Donning and Adjusting the AGSU Cap
Step 1: Preparing and Inspecting the Cap Structure
Examine the AGSU service cap or garrison cap for structural integrity, ensuring the interior sweatband is clean and free of sweat stains or lint. For the service cap, verify that the stiffener is centered and the visor is clean, flexible, and free of cracks. Brush the exterior wool-blend fabric using a soft-bristle brush in a counterclockwise motion to remove particulate matter and align the nap of the fabric.
Pro-Tip: Store your AGSU service cap in a dedicated rigid hat box rather than a duffel bag or locker shelf to prevent the crown from collapsing and the cardboard stiffener from warping.
Step 2: Positioning the Cap on the Head
Place the cap squarely on your head so that the sweatband rests straight across your forehead, approximately one inch (one finger-width) above the eyebrow eyebrows. Ensure the cap does not tilt backward like a baseball cap or slump too far forward over your eyes. For the service cap, the visor must project forward parallel to the ground; for the garrison cap, the fold must be aligned over the left side of the head with the crease centered.
Warning: Wearing the AGSU headgear tilted excessively to the left or right, or riding too high on the crown of the head, constitutes a direct violation of AR 670-1 and results in immediate uniform correction during inspections.
Step 3: Aligning Insignia and Cap Crests
For enlisted personnel, attach the U.S. disc insignia and branch insignia or distinctive unit insignia (DUI) centered on the garrison cap curtain, or place the large enlisted cap disc centered on the stiffened service cap visor. For commissioned officers, ensure the appropriate rank insignia or coat of arms is centered vertically on the front structural panel of the service cap. Verify that all metallic devices are polished, free of tarnish, and securely fastened with clutching clutches or screw posts to prevent shifting during movement.
Step 4: Conducting the Final Mirror Inspection
Stand before a full-length mirror while wearing the complete AGSU coat, shirt, and tie to check overall proportion and balance. Confirm that the distance between your eyebrows and the bottom edge of the cap is uniform across the entire front profile. Check that your hair does not extend past the lower edge of the front brim or spill awkwardly past the sideburn limits defined by AR 670-1.
Handmade U.S. Army AGSU Service Cap: Heritage Green Dress Cap, Gold ...
AGSU Headgear Specifications and Maintenance Standards
| Parameter | AGSU Service Cap (Visor Cap) | AGSU Garrison Cap (Flight Cap) |
|---|---|---|
| Primary Fabric | 55% wool, 45% polyester elastique weave | 55% wool, 45% polyester elastique weave |
| Insignia Placement | Centered on front crown; officer coat of arms or enlisted disc | Centered 1 inch from the front crease for officers; organizational pin placement for enlisted |
| Wear Angle | Parallel to the ground, 1 inch above eyebrows | Tilted slightly to the right, fold on the left, top crease aligned vertically |
| Cleaning Method | Dry clean only; spot clean sweatband with mild detergent | Hand wash sweatband gently; professional dry cleaning for fabric |
Common Uniform Faults and Field Remedies
- Root Cause: The service cap crown sags or tilts haphazardly due to moisture exposure or improper storage in tight spaces.Actionable Fix: Insert a clean, rigid cardboard form or specialized plastic cap insert inside the crown when not in use to maintain structural tension and restore the peak.
- Root Cause: The garrison cap slides downward over the eyes because the interior leather sweatband has stretched over time.Actionable Fix: Apply adhesive-backed sizing strips or moleskin padding along the interior rear sweatband to reduce the inner circumference and restore a secure fit.
- Root Cause: Tarnished metal insignia detract from the professional appearance of the AGSU headgear.Actionable Fix: Remove removable metal insignia from the cap, clean them using a non-abrasive brass cleaner or polishing cloth, rinse thoroughly, and dry completely before reattaching.
- Root Cause: Lint, dandruff, or stray hairs accumulate visibly on the dark shade 404 green fabric.Actionable Fix: Keep a travel-sized sticky lint roller in your locker or desk drawer to quickly sweep the cap fabric prior to stepping outdoors or attending formations.
Frequently Asked Questions
How far above the eyebrows should the AGSU cap sit?
The AGSU service cap and garrison cap must sit squarely on the head so that the bottom edge rests exactly one inch, or approximately the width of two fingers, above the eyebrows. It should never be worn pushed back on the head or tilted down over the eyes.
Can soldiers wear the garrison cap and the service cap interchangeably?
The garrison cap is authorized for wear with the AGSU for daily garrison duties, while the service cap is typically reserved for formal inspections, ceremonies, parades, and social events. Unit commanders may dictate specific headgear requirements based on the nature of the duty day or formation.
How do I clean sweat stains off the leather sweatband of an AGSU cap?
Gently wipe the interior leather sweatband using a damp cloth dipped in a mixture of cool water and mild saddle soap. Avoid soaking the exterior wool fabric or the internal cardboard stiffener, as excessive moisture causes permanent warping and shrinkage.
What is the correct way to store an AGSU service cap during travel?
Always pack your AGSU service cap inside a hard-sided hat box or place it at the top of your luggage where no heavy items can rest on top of it. Never crush the cap into a rucksack, duffel bag, or tight overhead compartment, as this destroys the internal stiffener and ruins the required peak shape.
Are officers and enlisted personnel required to wear different cap insignia?
Yes, officers wear grade insignia (such as embroidered pin-on rank or the coat of arms for general officers) centered on the service cap, whereas enlisted personnel wear the circular branch disc insignia. Garrison cap insignia rules also differ, with officers wearing their grade insignia and enlisted personnel wearing branch or unit insignia.
Ensure your military bearing remains unimpeachable by keeping your AGSU headgear properly fitted, inspected, and maintained according to current standards. Review your local unit SOP and AR 670-1 regularly to stay updated on any authorized adjustments to uniform wear and appearance.