How To Use A Come Along Tool Safely And Efficiently For Heavy Pulling

How To Use A Come Along Tool Safely And Efficiently For Heavy Pulling

Bolt Type Anti Twist Steel Rope Gripper Stringing Conductor Come Along ...

A come along is a manual, hand-operated ratchet winch utilizing a steel cable or web strap to pull heavy loads horizontally or at an incline. Mastering this device requires a firm understanding of rigging mechanics, working load limit (WLL) calculations, and proper handle leverage to prevent catastrophic line snaps or dangerous handle recoil.


Rigging Preparation and Safety Equipment Checklist

Operating a hand-operated cable puller safely demands meticulous preparation, correct equipment staging, and a thorough inspection of both the load and the anchor point. Before applying tension to any heavy object, evaluate the structural integrity of your anchor point, confirm the weight of the load does not exceed the mechanical capacity of your puller, and equip yourself with the necessary personal protective gear.



  • Essential Gear and Tools: Come along puller (rated for a minimum of 1.5 to 2 tons), two forged-steel anchor shackles, heavy-duty rigging straps or tow chains, heavy leather work gloves, safety glasses, and a wire brush for clearing debris from the cable drum.
  • Mandatory Knowledge and Standards: Working Load Limit (WLL) calculations, ASME B30.21 safety standards for manual lever hoists, structural anchor point evaluation, and load-path clearance protocols.
  • Benchmarks and Scope: Typical manual operation requires a pulling duration of 10 to 30 minutes depending on distance, with an estimated equipment budget ranging from forty to one hundred and fifty dollars for a professional-grade unit.

Step-by-Step Procedure for Operating a Come Along



Step 1: Secure the Stationary Anchor Point

Select a rigid, immovable anchor point capable of supporting the full weight of the load plus a safety margin of at least fifty percent. Wrap a heavy-duty rigging strap or chain securely around the anchor point, such as a large tree base or a dedicated vehicle recovery point, and connect both ends using a rated anchor shackle. Attach the stationary hook of the come along to this anchor shackle, ensuring the safety latch is fully closed and the hook is free-floating without side-loading stresses.

Warning: Never attach a come along anchor hook to temporary structures, residential utility poles, or untested structural members that could shear off under lateral tension.



Step 2: Extend and Attach the Pulling Line

Disengage the ratchet pawl by lifting or sliding the thumb release lever, allowing the drum to spin freely. Pull out the steel cable or strap until you have sufficient length to reach your target load, but ensure you leave a minimum of three wraps of cable permanently wound around the drum to prevent the cable anchor from tearing out. Attach the pulling hook securely to a reinforced recovery point, bridle strap, or towing eye on the object you intend to move.

Pro-Tip: Avoid wrapping the steel cable directly around rough rocks or sharp metal edges, as friction and abrasion will drastically lower the breaking strength of the wire rope.



Step 3: Engage the Ratchet Mechanism and Apply Tension

Flip the directional control lever into the forward pulling position to engage the drive pawl with the ratchet wheel. Slide the telescopic handle extension into place, grab the rubberized grip, and begin pumping the handle in a smooth, controlled motion. As the drum rotates, the cable will wind inward, taking up slack until the line goes taut and begins drawing the load toward the anchor point.



Step 4: Monitor the Line and Manage Travel Distance

Keep your body positioned safely to the side of the handle path at all times, avoiding the direct line of potential recoil. Watch the cable drum closely to ensure the wire rope is spooling evenly without bunching, crossing over itself, or slipping off the drum flanges. Stop periodically to check anchor stability and ensure the load is tracking correctly along your intended path without snagging on obstacles.



Step 5: Release Tension and Unload the Rigging

Once the load has reached its destination and is safely blocked, chocked, or secured to prevent rolling or sliding back, you can release the tension. Shift the directional lever into the reverse or lowering position, and slowly pump the handle until the tension transfers entirely from the cable to the secondary tie-downs. Press the release catch to disengage the pawl completely, unwind the remaining slack by hand, and carefully disconnect your rigging hardware.


How to use a come along ⋆ ctf.bnsf.com

How to use a come along ⋆ ctf.bnsf.com

Come Along Specifications and Comparison Matrix



Feature / Metric Standard Cable Come Along Heavy-Duty Web Strap Come Along Electric Winch Comparison
Typical Capacity 1 to 4 Tons 1 to 2 Tons 2 to 5 Tons
Pulling Medium Galvanized Aircraft Wire Rope Polyester Webbing Strap Steel Wire Rope or Synthetic Line
Max Pull Distance 6 to 12 Feet 6 to 10 Feet Limited by Battery / Drum Capacity
Primary Advantage High durability, easy to store Protects surfaces, less prone to kinking Faster operation, lower physical fatigue
Primary Disadvantage Wire fraying risk, dangerous recoil Strap degradation from UV and abrasion Requires power source, heavy unit weight

Troubleshooting Common Come Along Field Failures



  • Cable Jamming or Uneven Spooling:

    • Root Cause: Pulling at an improper angle or letting tension drop slack while winding, causing the wire rope to wedge between existing wraps.
    • Actionable Fix: Relieve tension safely, use a pair of heavy leather gloves and pliers to untangle the cross-wound strands, and maintain constant tension while re-spooling.
  • Handle Bending or Distortion:

    • Root Cause: Exceeding the rated Working Load Limit of the tool or using unauthorized cheater pipes to extend the handle length for extra leverage.
    • Actionable Fix: Stop operation immediately, unload the system, replace the compromised handle assembly, and use a snatch block to double your mechanical advantage.
  • Slipping Ratchet Gear:

    • Root Cause: Accumulation of dirt, mud, or rust inside the ratchet mechanism, preventing the locking pawl from engaging the teeth securely.
    • Actionable Fix: Clean the gear assembly thoroughly with a wire brush and solvent, inspect the spring-loaded pawl for wear, and lubricate lightly with machine oil.

Frequently Asked Questions



Can I use a cheater bar on a come along handle for more leverage?

No, you should never slide a pipe or extension bar over the manufacturer handle. Doing so increases the mechanical leverage beyond the design limits of the frame, which will either bend the handle or snap the cable. If the load is too heavy for the tool, you need to use a snatch block to create a pulley system or upgrade to a higher-capacity winch.



How many cable wraps must remain on the drum during operation?

You must keep a minimum of three full wraps of wire rope on the drum at maximum extension. Winding the cable out past this safety threshold puts immense shear stress on the internal cable anchor point, risking sudden detachment and dangerous whip-lash.



What is the difference between a come along and a chain hoist?

A come along is a horizontal pulling tool that uses a lever-action ratchet and cable to drag loads across the ground or an incline. A chain hoist is primarily designed for vertical lifting, using a hand chain and internal gearing to raise and lower suspended weights securely.



Why is my come along handle kicking backward violently?

Handle kickback occurs when the directional lever is bumped into the reverse position or the locking pawl fails to seat properly while the line is under tension. Always keep your face and body clear of the handle swing arc to protect yourself from severe facial or dental injuries if the handle begins to spin out of control.



How do I increase the pulling power of my come along?

You can double the pulling capacity of your come along by using a snatch block pulley at the load. Anchor your cable back to the main anchor point or run a line through a pulley attached to the load, which cuts the required pulling effort in half while doubling your mechanical advantage.

Master the art of mechanical advantage today and ensure every heavy recovery and construction project runs smoothly by choosing the right rigging tools for the job.


CT102.501 Come along clamp | Cable pulling equipments | Ensto

CT102.501 Come along clamp | Cable pulling equipments | Ensto

Read also: La Pinata Concord Ca