U-Haul Miles Per Gallon: The Complete Fuel Economy Guide For Every Truck Size

U-Haul Miles Per Gallon: The Complete Fuel Economy Guide For Every Truck Size

Miles Per Gallon, by Mike Magrann - DiWulf

Most U-Haul rental trucks average between 10 and 15 miles per gallon, though specific efficiency ranges from 8 MPG for the 26-foot super-mover to 19 MPG for the 8-foot pickup truck. To accurately calculate your total fuel cost, multiply your total trip distance by the average fuel price, then divide by the specific MPG rating for your selected chassis size while accounting for a 15% efficiency loss when the vehicle is fully loaded.


Estimating Rental Fuel Costs and Equipment Requirements

Planning a relocation requires a granular understanding of the logistical costs associated with heavy equipment operation. U-Haul operates a diverse fleet primarily built on Ford and GMC chassis, each with distinct aerodynamic profiles and engine displacements that directly impact fuel consumption. Before reserving a vehicle, you must evaluate the Gross Vehicle Weight Rating (GVWR) against your expected payload, as an overloaded smaller truck often consumes more fuel than a larger truck operating within its optimal torque range.



Essential Planning Data and Gear



  • Chassis Verification: Confirm whether your rental is a Ford E-Series or a GMC Savana/Chevrolet Express platform, as transmission gearing differs slightly between manufacturers.
  • Fuel Grade Requirements: Standard U-Haul gasoline engines are calibrated for 87-octane unleaded fuel; using higher octane does not improve MPG but increases operational costs.
  • Route Elevation Mapping: Identify significant mountain passes or steep gradients, as climbing grades can reduce fuel efficiency by up to 50% during the ascent.
  • Load Calculation: Estimate your payload weight. A fully loaded 15-foot truck can weigh upwards of 14,000 pounds, drastically altering the power-to-weight ratio.
  • Ancillary Equipment: Ensure you have a tire pressure gauge to maintain optimal PSI, as under-inflated tires on a dual-rear-wheel (DRW) setup significantly increase rolling resistance.

Step-by-Step Logistics for Maximum Fuel Efficiency

Optimizing your U-Haul miles per gallon involves a combination of mechanical awareness and strategic driving behavior. The following steps outline how to manage your rental from the lot to the destination to ensure you remain within your fuel budget.



Step 1: Select the Chassis Based on Cubic Displacement

Do not simply choose the smallest truck to save money. A 10-foot truck equipped with a V8 engine may struggle and consume more fuel when overloaded compared to a 15-foot truck with a more powerful V10 or heavy-duty V8 engine that manages the weight with less strain.



  1. Assess the total cubic footage of your belongings.
  2. Choose a truck that allows for at least 10% "buffer space" to avoid packing to the ceiling, which helps maintain a lower center of gravity.
  3. Check the "Tow/Haul" mode availability on the dashboard, which recalibrates shift points for heavy loads.


Step 2: Perform a Pre-Trip Mechanical Inspection

U-Haul maintains their fleet, but individual unit wear varies.



  1. Check the air filter indicator if accessible; a clogged filter restricts airflow and kills MPG.
  2. Verify tire pressure matches the specifications located on the driver-side door jamb. DRW (Dual Rear Wheel) trucks are particularly sensitive to pressure imbalances.
  3. Ensure the fuel cap is tightened until it clicks to prevent evaporative fuel loss and "Check Engine" lights related to the EVAP system.

Pro-Tip: Cold tire pressure should be checked before you start driving. For every 10-degree drop in temperature, tires can lose 1-2 PSI, which increases the contact patch and raises fuel consumption due to friction.



Step 3: Implement the 60 MPH Threshold

Aerodynamic drag increases exponentially with speed. U-Haul box trucks are essentially non-aerodynamic cubes.



  1. Maintain a steady speed of 55 to 60 MPH on highways.
  2. Driving at 70 MPH instead of 60 MPH can result in a 20% to 25% decrease in fuel economy.
  3. Use cruise control only on flat terrain; on hilly terrain, manual throttle control allows you to gain momentum on the downhill to assist with the following uphill climb.


Step 4: Manage Kinetic Energy and Braking

Heavy trucks require significant energy to return to cruising speed after braking.



  1. Increase following distance to 4-5 seconds to allow for "engine braking" and gradual deceleration.
  2. Avoid rapid acceleration from stoplights; imagine an egg between your foot and the gas pedal.
  3. Minimize idling. Modern fuel-injected engines consume more fuel idling for three minutes than they do during the combustion cycle required to restart the engine.

Warning: Never shift a loaded rental truck into neutral while descending hills. This causes "brake fade" due to overheating and removes your ability to use the engine's compression to maintain a safe speed, which is a critical safety and mechanical failure point.


Miles per Gallon (US) to Liters per 100 Kilometers Converter

Miles per Gallon (US) to Liters per 100 Kilometers Converter

Technical Specifications and Fuel Performance Benchmarks

The following table provides the standard technical parameters for the current U-Haul fleet. These figures are based on mixed driving conditions (60% highway, 40% city) and reflect an average payload.



Vehicle Type Engine Configuration Fuel Tank Capacity Estimated MPG (Empty) Estimated MPG (Loaded)
8' Pickup Truck V6 or V8 Gas 34 Gallons 19 - 21 MPG 15 - 17 MPG
9' Cargo Van V6 Gas 25 Gallons 18 - 20 MPG 14 - 16 MPG
10' Box Truck V8 Gas 33 Gallons 12 - 15 MPG 8 - 10 MPG
15' Box Truck V8 or V10 Gas 40 Gallons 10 - 12 MPG 7 - 9 MPG
17' Box Truck V8 or V10 Gas 40 Gallons 10 - 12 MPG 7 - 9 MPG
20' Box Truck V10 Gas 40 Gallons 10 MPG 6 - 8 MPG
26' Box Truck V10 Gas 60 Gallons 8 - 10 MPG 5 - 7 MPG

Common Fuel Efficiency Failures and Field Fixes

Unexpected drops in fuel economy are often symptomatic of mechanical issues or environmental factors that can be addressed during the trip.

Excessive Drag from External Attachments



  • Root Cause: Improperly secured tarps on a trailer or leaving the "Mom's Attic" (the compartment over the cab) door unlatched (on specific older models) creates massive air resistance.
  • Actionable Fix: Ensure all roll-up doors are fully latched and locked. If towing a vehicle, ensure the vehicle's windows are closed and no loose covers are flapping, as this creates a "parachute effect" behind the truck.

Transmission Hunting and Overheating



  • Root Cause: Driving in high gear while ascending a grade or bucking a headwind causes the transmission to "hunt" between gears, increasing RPMs and fuel consumption.
  • Actionable Fix: Engage the "Tow/Haul" mode. If the truck does not have this, manually downshift to a lower gear (e.g., "3" or "L") to keep the engine in its power band without constant shifting. This stabilizes fuel delivery and protects the transmission fluid from thermal breakdown.

Payload Imbalance and Suspension Squat



  • Root Cause: Concentrating all weight at the very rear of the truck causes the front end to rise, increasing the air that flows under the chassis rather than over it, creating turbulent drag.
  • Actionable Fix: Redistribute 60% of the total weight towards the front of the box (near the cab). This keeps the truck level, maintains proper front-wheel alignment, and ensures the aerodynamic air dam on the front bumper functions correctly.

Frequently Asked Questions



Does towing a car behind a U-Haul affect the miles per gallon?

Yes, towing an auto transport or a tow dolly typically reduces your fuel economy by 1 to 3 miles per gallon. The added weight and the increased rolling resistance of the extra axles require the engine to maintain higher RPMs to overcome inertia, particularly during stop-and-go driving.



What is the average fuel cost for a 1,000-mile move in a 26-foot truck?

Based on an average of 8 MPG, a 1,000-mile trip requires approximately 125 gallons of fuel. If the average price of regular unleaded is $3.50 per gallon, your estimated fuel cost would be $437.50, though you should budget an extra 15% for idling, detours, and heavy terrain.



Why does my U-Haul truck get worse gas mileage than the website says?

U-Haul's advertised MPG figures are often based on ideal conditions with a light load and moderate speeds. Real-world factors such as driving over 60 MPH, aggressive acceleration, high-altitude mountain passes, and using the air conditioning at maximum capacity can reduce efficiency by 20% or more.



Should I fill up the U-Haul with Premium gas to get better mileage?

No, U-Haul engines are designed for 87-octane regular gasoline. Using premium 91 or 93-octane fuel will not provide a measurable increase in MPG or horsepower because the engine's compression ratio and ignition timing are not calibrated to take advantage of the higher knock resistance.



Is the fuel gauge on a U-Haul accurate for calculating MPG?

Fuel gauges are notoriously non-linear and should not be used for precise MPG calculations. To accurately track your efficiency, use the "fill-to-fill" method: fill the tank completely, record the odometer reading, drive to your next stop, refill completely, and divide the miles driven by the gallons consumed.

Master Your Move with Precision Planning

Understanding the technical nuances of U-Haul miles per gallon allows you to eliminate the financial uncertainty of long-distance moving. By selecting the correct chassis for your payload and adhering to strict aerodynamic driving standards, you can significantly reduce your total cost of operation.


Study: Average Miles Driven Per Year in the U.S. (2024) | Insurify

Study: Average Miles Driven Per Year in the U.S. (2024) | Insurify

Read also: Workers are reacting to the cut in unemployment benefits iowa