How To Turn Eyesight Off In A Subaru: A Comprehensive Technical Guide
Subaru’s EyeSight Driver Assist Technology is a stereo camera-based safety system designed to monitor traffic movement, optimize cruise control, and warn drivers of sway or lane departure. While the system is permanently active by default upon vehicle startup, owners can temporarily disable specific functions or the entire suite via the overhead console buttons or the multi-function steering wheel interface depending on the specific model year and trim level.
Pre-Operation Requirements and System Understanding
Before attempting to modify the operation of the EyeSight system, it is essential to understand that this technology is an active safety suite comprised of pre-collision braking, adaptive cruise control, lane departure warning, and lane keep assist. Disabling these features changes the dynamic behavior of the vehicle, particularly regarding its ability to autonomously react to emergency braking scenarios.
- Model Year Identification: Ensure you verify whether your vehicle utilizes the physical overhead buttons (typical in 2015-2019 models) or the digital menu interface located within the instrument cluster (standard in 2020-present models).
- Safety Thresholds: Understand that the system is engineered to reset to the "On" position every time the ignition is cycled. There is no factory-authorized method to permanently disable EyeSight through the vehicle’s head unit or standard user settings.
- Environmental Context: Common reasons for wanting to disable these features include driving through extreme weather (heavy snow or fog) where the cameras may be obscured, track driving, or situations where the system is prematurely intervening.
- Estimated Duration: The process of disabling specific sub-features through the steering wheel menu takes approximately 30 to 60 seconds of interaction.
Procedures for Deactivating EyeSight Features
Step 1: Using the Overhead Console Buttons (Legacy Models)
For Subaru vehicles produced between 2015 and 2019, the primary method for disabling specific EyeSight functions involves the overhead console, usually located near the map lights.
- Locate the button labeled with the EyeSight icon (two cameras facing the road) and the lane departure icon.
- Press and hold the button until you hear an audible chime.
- Observe the Multi-Function Display (MFD) or the instrument cluster; a warning light will illuminate indicating that the lane departure warning or pre-collision braking systems are now in standby mode or fully disabled.
- To re-enable, press and hold the same button until the light extinguishes and the system chime sounds.
Step 2: Utilizing the Steering Wheel Interface (Current Models)
In newer Subaru models equipped with the latest iterations of EyeSight, the controls have been integrated into the digital cockpit.
- Use the steering wheel-mounted arrow keys to navigate the instrument cluster menu.
- Locate the Settings or "Driver Assist" sub-menu.
- Select "EyeSight" to view the list of active features.
- Toggle the specific features—such as Lane Departure Warning or Pre-Collision Braking—to "Off" or "Standby."
- Confirm the selection by pressing the "i/SET" button on the steering wheel.
Warning: Disabling the Pre-Collision Braking system removes the vehicle’s ability to apply emergency pressure to the brakes if the system detects an impending collision. Only perform this in closed-course environments or controlled settings where you are in full command of vehicle braking.
Step 3: Managing Lane Keep Assist Separately
Lane Keep Assist is often the feature that drivers find most intrusive. You can disable this independently of the other safety systems without fully shutting down the entire EyeSight suite.
- Locate the specific Lane Keep Assist button on the steering wheel, usually denoted by a steering wheel icon between two lane lines.
- Press the button once. You will see the icon on your dashboard change from white to gray or disappear entirely.
- Note that the system will automatically reactivate once the vehicle speed reaches a specific threshold (usually above 37 mph) on some models, requiring a manual toggle if you wish to keep it off.
Subaru heeft succes met Eyesight - Autointernationaal.nl
Technical Comparison of EyeSight Functionality and Deactivation Parameters
| Feature Name | Primary Function | Deactivation Method | System Reset Behavior |
|---|---|---|---|
| Pre-Collision Braking | Automatic emergency stop | Steering Wheel Menu | Resets on ignition cycle |
| Adaptive Cruise Control | Maintains distance/speed | Steering Wheel Button | Stays off until re-engaged |
| Lane Departure Warning | Alerts when crossing lines | Overhead Console Button | Resets on ignition cycle |
| Lane Keep Assist | Steering correction | Steering Wheel Icon | Persistent until manually toggled |
Common Failure Scenarios and Field Remedies
Understanding why the EyeSight system might disable itself or why your attempts to deactivate it appear unsuccessful is vital for vehicle maintenance.
- Root Cause: Obstructed Camera Sensors. If the system disables itself and shows a warning on the dash, it is likely due to condensation, dirt, or ice on the windshield in front of the stereo cameras.
- Actionable Fix: Clear the area inside the cabin where the camera lenses reside. Do not use cleaning chemicals on the glass directly in front of the lenses; use a clean, dry microfiber cloth.
- Root Cause: Sun Glare or Low Visibility. In conditions of extreme glare or blinding snow, the cameras may lose visual reference.
- Actionable Fix: The system will automatically go to "Standby" mode. There is no fix for this other than waiting for environmental conditions to improve, as the cameras require visual input to function.
- Root Cause: Misalignment after Windshield Replacement. If you have recently had a windshield replaced, the cameras must be recalibrated by a dealership.
- Actionable Fix: If the system refuses to activate or displays a "Check EyeSight" message, schedule a calibration appointment. This cannot be fixed via the steering wheel menu.
Frequently Asked Questions
Can I permanently disable EyeSight so I never have to turn it off again?
No, Subaru designs the EyeSight system to reset to the "On" position every time the engine is started to ensure maximum safety compliance. There is no documented or safe method for permanently bypassing this software default.
Will disabling EyeSight void my vehicle warranty?
Temporarily deactivating features through the intended menu settings will not void your warranty, as these settings are provided for driver preference. However, unauthorized hardware modifications to the camera housing or wiring harness may result in a denial of coverage for related electrical components.
Does turning off EyeSight affect my insurance rates?
Most insurance providers track the presence of safety equipment based on the vehicle identification number and trim level rather than your daily usage of those systems. However, intentionally tampering with or disabling safety sensors is discouraged and may complicate liability in the event of an accident.
Why does my EyeSight system disable itself when I enter a car wash?
The combination of high-pressure water, soap, and mechanical brushes creates a situation where the cameras cannot detect the road, leading the system to trigger a temporary shut-off. This is normal behavior and the system will resume function once the windshield is clear and the vehicle is back on the road.
Ensure Optimal Performance for Your Subaru
If you find yourself frequently needing to disable specific EyeSight features, consider visiting your local authorized Subaru service center to discuss potential software updates that may refine the sensitivity of the system to your driving style. Maintaining a clean, clear windshield and ensuring your vehicle’s software is current will provide the most reliable experience with your Subaru’s advanced safety suite.