How To Put On A Hearing Aid: A Step-by-Step Audiological Guide

How To Put On A Hearing Aid: A Step-by-Step Audiological Guide

How to put hearing aids in: Our guide to setting up and getting the ...

Inserting a hearing aid correctly requires aligning the device body with your ear anatomy, straightening the ear canal, and seating the receiver or dome securely to form an acoustic seal. Achieving a proper, flush fit prevents acoustic feedback (whistling), optimizes sound delivery, and ensures physical comfort throughout the day. By mastering these precise anatomical positioning techniques, you can confidently secure behind-the-ear, receiver-in-canal, and in-the-ear style devices.


Pre-Insertion Anatomy and Equipment Check

Before attempting to insert a hearing aid, you must prepare the device and familiarize yourself with your ear's physical landscape. Inserting a hearing aid without verifying its physical state or understanding your ear's bends can lead to skin abrasion, wax compaction, or damaged components.

The human ear canal is not a straight tube; it has a natural S-curve that bends first forward and upward, then backward and downward. Straightening this canal during insertion is the secret to a pain-free, secure fit. Additionally, the device itself must be clean, powered, and correctly oriented to match the specific ear canal it was programmed to fit.



Equipment and Knowledge Checklist



  • Hearing Aid Identification: Confirm the color-coded marker on your device. Right ears are designated by Red markers, and Left ears are designated by Blue markers ("Red is Right, Blue is Left").
  • Essential Maintenance Tools: Have a clean, lint-free microfiber cloth, a wax-removal brush, and a wax guard replacement tool nearby.
  • Physical Inspection: Verify that the silicone dome or custom earmold is securely attached to the receiver wire or sound tube. A loose dome can detach inside the ear canal.
  • Power State Verification: Ensure the battery drawer is closed completely on zinc-air battery models, or check that rechargeable models show a green indicator light signifying a functional charge.
  • Estimated Prep Time: 2 minutes.
  • Financial Benchmarks: Basic maintenance tools typically cost between $10 and $25, while standard wax guards range from $5 to $15 per pack.

Clinical Protocol for Inserting Hearing Aids by Device Type

The insertion process varies based on the form factor of your device. Follow these dedicated step-by-step instructions for the two most common configurations: Receiver-in-Canal (RIC) / Behind-the-Ear (BTE) devices, and custom In-the-Ear (ITE) / Completely-in-the-Canal (CIC) devices.



Step 1: Identify and Orient the Device

Pick up the hearing aid designated for the ear you are addressing. Look for the red (right) or blue (left) indicator, usually printed on the shell of custom devices or found on the receiver housing of RIC models. Hold the device by its main body or the bend of the receiver wire using your thumb and index finger. The curvature of the wire or tube should naturally point toward the entrance of your ear canal.



Step 2: Position the Case Behind the Ear (RIC/BTE)

For RIC and BTE models, drape the main plastic body of the hearing aid over the top of your ear (the pinna). The body should rest snugly and comfortably in the groove where your ear meets your skull. The receiver wire or thin tube should dangle forward over the front of your ear, hanging straight down toward your face.

Warning: Do not twist, bend, or crimp the receiver wire at sharp angles during this step. Internal copper wires can break, disrupting the electrical signal to the receiver and necessitating a professional repair.



Step 3: Straighten the Ear Canal and Insert the Dome or Earmold

To bypass the first bend of your ear canal and prevent the dome from folding over itself, you must manually open the airway. Use your opposite hand to reach over your head, grasp the top of your ear (the helix), and gently pull it upward and backward.

Using your dominant hand, hold the receiver wire just behind the dome or mold. Push the dome or custom earmold gently into your ear canal. Guide it forward and downward, following the natural path of your canal. Push until the wire rests flush against the side of your head, near your cheekbone.

Pro-Tip: If you experience friction or resistance during insertion, apply a single drop of water-based, skin-safe hearing aid lubricant (or a tiny drop of pure mineral oil) to the outer edges of the dome or earmold. Never get lubricant inside the sound outlet port or wax guard.



Step 4: Position the Retention Lock

Many RIC devices are equipped with a thin, flexible plastic tail called a retention lock, sport clip, or anchor. Using your index finger, sweep this plastic tail downward and push it into the bottom bowl of your outer ear (the concha bowl). It should curve along the bottom rim of your ear, acting as a spring that holds the dome securely inside your canal, preventing it from migrating outward when you talk or chew.



Step 5: Insert Custom In-the-Ear (ITE/CIC) Devices

For custom shells, hold the device between your thumb and index finger, with the small extraction cord (if present) pointing downward at the bottom. The volume controls or battery door should face outward.

Pull your pinna upward and backward with your free hand. Insert the canal portion of the shell into your ear canal first. Gently rotate the device slightly forward and backward as you press it inward. It should slip into place, with the outer portions of the shell fitting snugly into the contours of your concha bowl and tragus.



Step 6: Verify the Acoustic Seal and Test the Fit

Once fully inserted, run your index finger along the edge of your ear. The receiver wire or custom shell should feel flush against your skin, with no protruding edges. Open and close your mouth, chew, and shake your head gently. The hearing aid should remain securely anchored without any shifting, sliding, or physical pinching.

Listen carefully: if you hear a constant whistling or squealing sound, the device is not inserted far enough to form an airtight seal, or the dome is too small for your canal. Push the dome slightly further inward or adjust the insertion angle until the feedback stops completely.


How to put in hearing aids - San Francisco Hearing Center

How to put in hearing aids - San Francisco Hearing Center

Hearing Aid Component Specifications and Fitting Tolerances

Selecting the correct dome size, tube length, and receiver strength is essential to achieving a proper physical fit and the desired acoustic profile. The following table provides the structural specifications and physical tolerances required for safe, effective daily use.



Device Style / Component Standard Size Range Canal Insertion Depth Primary Retention Method Common Material Compound Typical Lifespan before Replacement
RIC Dome (Open/Closed/Power) 5 mm to 12 mm 10 mm to 15 mm Concha lock (sport clip) & friction Medical-grade silicone 1 to 3 months
Custom Earmold (BTE) Sized to ear impression 15 mm to 20 mm Concha lock, helix lock, or canal lock Acrylic or soft medical silicone 1 to 2 years (adults)
ITE / ITC Shell Sized to ear impression 12 mm to 18 mm Helix/concha retention curves Medical-grade hard acrylic 2 to 4 years (shell housing)
Thin Tube (BTE) Size 0 to Size 4 (length) 12 mm to 15 mm Friction of the tube bend over pinna Polyurethane / PVC 3 to 6 months
Receiver Wire (RIC) Size 0 to Size 5 (length) 10 mm to 15 mm Tension of wire & concha lock Sheathed copper wire / plastic 1 to 2 years

Common Fitment Failures and Audiological Remedies

Even experienced users encounter fitment and placement issues due to natural ear canal changes, wax buildup, or physical wear on the hearing aid materials. Use these troubleshooting strategies to diagnose and resolve physical insertion failures.



Scenario 1: High-Pitched Whistling or Squealing During or After Insertion



  • Root Cause: This is acoustic feedback. It occurs when amplified sound escapes from the ear canal due to an incomplete seal and travels back into the hearing aid's microphone, creating a continuous loop. This can be caused by an improperly seated dome, a dome that is too small, or a blockage of earwax in the canal that reflects the sound back outward.
  • Actionable Fix: Remove the device and inspect the dome for damage or wax accumulation. Reinsert the device, ensuring you pull your pinna up and back to straighten the canal, allowing the dome to seat deeply enough to form a complete seal. If the whistling continues when you push on the device, consult your audiologist to be fitted for a larger dome or a custom earmold.


Scenario 2: Physical Discomfort, Soreness, or Rubbing in the Ear Canal



  • Root Cause: Soreness is usually caused by an incorrectly oriented dome, an oversized dome, or inserting a custom earmold at an improper angle, which scrapes the sensitive, thin skin of the external auditory canal. It can also occur if the receiver wire length is too short, pulling the device downward against the top of the ear.
  • Actionable Fix: Immediately remove the hearing aid and check the ear canal for redness or skin breaks. Reinsert the device using a skin-safe, water-based lubricant to reduce friction. If the pain is localized to one spot, your audiologist may need to buff down a high spot on a custom acrylic earmold or exchange your receiver wire for a longer size to relieve upward tension.


Scenario 3: The Hearing Aid Constantly Backs Out or Slides Loose



  • Root Cause: Jaw movements (such as talking, chewing, or yawning) naturally alter the shape of the ear canal. If the hearing aid dome is too small, or if the retention lock (sport clip) is missing, bent, or positioned incorrectly, these jaw dynamics will gradually pump the device out of the canal.
  • Actionable Fix: Ensure the retention lock is tucked securely into the bottom of your concha bowl. If the lock has lost its spring-like tension, gently warm the monofilament plastic tail with a hairdryer for 3 seconds and bend it outward to restore its spring shape, or ask your audiologist to install a thicker retention lock. Alternatively, swap to a larger dome size or a double-vented dome to increase friction against the canal walls.

Frequently Asked Questions



Why is my hearing aid whistling when I try to put it in?

Whistling during insertion is completely normal. As your hand approaches your ear, it reflects the sound coming from the receiver back into the microphone, creating feedback. To prevent this, hold the device by its edges to avoid covering the microphone ports, or insert the device while it is turned off or muted, powering it on only after it is fully seated.



How far down the ear canal should the hearing aid dome go?

The silicone dome should sit past the opening of the ear canal, deep enough that the receiver wire lies completely flat and flush against the side of your face. It should not be visible when looking at your ear from a direct, head-on profile. If you can see the silicone dome protruding from the entrance of your ear canal, it is not inserted deeply enough.



How do I know if my hearing aid is in the correct ear?

Look for the color-coded markers on the chassis or receiver housing of the device. Red indicates the right ear, while blue indicates the left ear. Additionally, the physical curve of the receiver wire or custom earmold should point forward toward your face; if the curve points backward toward your neck, the devices are swapped.



Why does my hearing aid feel loose or tickle my ear canal?

A tickling sensation or a feeling of looseness typically means the silicone dome is too small for your ear canal, allowing it to vibrate or move when you speak or chew. Upgrading to a larger dome size, changing from an open dome to a closed dome, or adding a retention lock to the wire will secure the device and resolve the sensation.



Should I turn on the hearing aid before or after inserting it?

If you struggle with whistling or feedback during insertion, it is best to insert the device while it is muted or powered off, and then turn it on once it is securely seated. However, if your devices have a "power-on delay" feature programmed by your audiologist, you can safely turn them on before insertion, as they will remain silent for several seconds while you position them in your ears.

Schedule a Professional Fitting and Calibration Session

If you continue to experience physical discomfort, persistent whistling, or difficulty inserting your devices, your ear anatomy may require a customized solution. Contact our audiology clinic today to schedule a personalized fitting session where we can select the perfect dome sizes, adjust wire lengths, or craft custom-molded shells tailored specifically to your ears.


Simple steps to enhancing hearing aid performance

Simple steps to enhancing hearing aid performance

Read also: Hamil family funeral home abilene tx supports the local community