Mastering The Unforgiven: The Ultimate Guide To Painting Dark Angels Space Marines
Achieving the iconic look of the Dark Angels requires a deep understanding of high-contrast layering, beginning with a saturated Caliban Green base and progressing through translucent glazes of Warpstone Glow and Moot Green. Technical success is measured by the sharpness of the edge highlights and the smooth transitions on monastic robes, utilizing a 1:1 thinning ratio to prevent texture buildup on the miniature's surface.
Pre-Operation Logistics and Hobby Equipment Checklist
Before applying paint to plastic, a systematic approach to preparation ensures the longevity of the finish and the clarity of the detail. Dark Angels models are characterized by intricate iconography, including feathers, icons of the Unforgiven, and hooded robes. Proper surface preparation is non-negotiable for these high-detail sculpts.
- Essential Painting Tools:
- High-quality pointed round brushes (Sizes: 2, 0, and 000 for fine detailing).
- Wet palette to maintain paint moisture and facilitate blending.
- Controlled-flow hobby knife for mold line removal.
- Sonic cleaner or warm soapy water for resin components (if using Forge World kits).
- Mandatory Paint Palette (Citadel or Vallejo Equivalents):
- Primers: Chaos Black or Grey Seer (for Contrast method).
- Greenwing: Caliban Green, Warpstone Glow, Moot Green.
- Deathwing: Zandri Dust, Ushabti Bone, Screaming Skull.
- Ravenwing: Abaddon Black, Eshin Grey, Dawnstone.
- Washes: Nuln Oil, Agrax Earthshade, Seraphim Sepia.
- Technical Prerequisites:
- Understanding of "sub-assembly" for models with large capes or chest-obscuring weapons.
- Knowledge of the "three-color minimum" standard vs. "parade ready" layering techniques.
- Estimated Project Duration: 4–6 hours per standard infantry model; 15–20 hours for character models like Azrael or Lion El'Jonson.
The Dark Angels Painting Workflow: A Phase-Based Technical Execution
The Dark Angels Chapter is unique in its division into three distinct color schemes: the traditional dark green of the "Greenwing," the bone-white of the "Deathwing" Terminators, and the midnight black of the "Ravenwing" cavalry. This guide focuses on the primary Greenwing armor while providing the technical foundation for the specialized wings.
Step 1: Priming and Foundational Undercoating
Begin by priming the miniatures with a high-quality matte black spray. Black is the preferred primer for Dark Angels because it provides natural "pre-shading" in the deep recesses of the power armor joints and under the pauldrons.
- Ensure the ambient humidity is below 60% to prevent "fuzzy" textures during spraying.
- Apply the primer in short, controlled bursts from a distance of 8 to 12 inches.
- Once dry, apply a "zenithal" highlight using a grey or white spray from a 45-degree angle above the model to map out where light naturally hits the plates.
Pro-Tip: If you are using the "Slapchop" method for speed painting, use a heavy white drybrush over the black primer before applying "Dark Angels Green" Contrast paint to achieve instant value gradients.
Step 2: Developing the Caliban Green Base
The signature Dark Angels green is not a bright forest green; it is a deep, brooding olive-black. Use Caliban Green as your base color.
- Thin the paint on your wet palette with a 50/50 ratio of water or acrylic medium.
- Apply two thin coats over the entire armor surface. Do not worry about complete opacity on the first coat; the second coat will even out the pigment.
- Ensure the paint is fully dry between coats to avoid "tearing" the previous layer, which creates unwanted texture.
Step 3: Recess Shading for Maximum Definition
To make the armor plates "pop," you must define the gaps between the panels. This is known as recess shading or "pin-washing."
- Use Nuln Oil (Gloss or Matte) or a 1:1 mix of Caliban Green and Abaddon Black.
- Using a size 0 brush, carefully deposit the shade into the armor panel lines, the vents on the power pack, and the recesses of the helmet.
- If the shade spills onto the flat surfaces, immediately clean it with a damp brush to maintain the purity of the Caliban Green base.
Step 4: Layering and Edge Highlighting
This is the most critical stage for the "Eavy Metal" style. The goal is to simulate light catching the sharpest edges of the power armor.
- First Highlight: Mix Caliban Green and Warpstone Glow (50/50) and apply a "chunky" highlight to all prominent edges. Use the side of your brush rather than the tip for greater control.
- Second Highlight: Use pure Warpstone Glow to apply a thinner line within the previous highlight. Focus on the upper edges of the pauldrons, the top of the kneecaps, and the helmet's brow.
- Final Spot Highlight: Apply tiny dots of Moot Green only at the sharpest corners and points where three armor planes meet (e.g., the corners of the backpack vents).
Warning: Do not over-apply Moot Green. Too much bright green will shift the model's appearance toward the Salamanders Chapter, losing the Dark Angels' grim aesthetic.
Step 5: Painting the Monastic Robes and Tabards
The Dark Angels are "Monks of War," often wearing cream-colored robes over their armor. This provides a necessary visual contrast to the dark green.
- Basecoat: Apply Zandri Dust in two thin layers over all cloth areas.
- Shade: Apply a generous wash of Seraphim Sepia. Focus the pooling in the deep folds of the fabric.
- Layer: Once dry, reclaim the flat surfaces of the cloth with Ushabti Bone, leaving the sepia visible in the folds.
- Final Highlight: Edge highlight the highest ridges of the cloth with Screaming Skull or a mix of Ushabti Bone and White Scar.
Step 6: Weaponry and Chapter Iconography
Dark Angels typically use red casings for their bolters, paying homage to the original Legion colors and providing a complementary color to the green armor.
- Bolter Casings: Basecoat with Mephiston Red, shade with Agrax Earthshade, and highlight with Evil Sunz Scarlet.
- Chest Aquila: Paint the imperial eagle in Balthasar Gold, wash with Agrax Earthshade, and highlight with Liberator Gold for a burnished, ancient look.
- Eyes/Lenses: Use a base of Caliban Green (dark), followed by a small line of Evil Sunz Scarlet, and a tiny dot of white in the back corner to simulate a glass reflection.
How to Paint Ravenwing - Greg Chiasson's Method - Tabletop Battles
Technical Specifications and Color Matrix
The following table outlines the specific paint sequences required to achieve the three distinct looks of the Dark Angels sub-factions.
| Sub-Faction | Primary Base Color | Primary Wash/Shade | Mid-Tone Highlight | Final Edge Highlight |
|---|---|---|---|---|
| Greenwing (Infantry) | Caliban Green | Nuln Oil | Warpstone Glow | Moot Green |
| Deathwing (Terminators) | Zandri Dust | Seraphim Sepia | Ushabti Bone | Screaming Skull |
| Ravenwing (Bikers) | Abaddon Black | Darkstar Blue (Recess) | Eshin Grey | Dawnstone |
| Robes/Tabards | Zandri Dust | Agrax Earthshade | Ushabti Bone | Pallid Wych Flesh |
| Power Weapons | Stegadon Scale Green | Drakenhof Nightshade | Temple Guard Blue | Baharroth Blue |
Common Painting Failures and Expert Corrective Techniques
Miniature painting is a precision skill where minor errors can significantly impact the visual cohesion of an entire squad. Identifying and fixing these issues early is key to a high-quality finish.
Chalky or Grainy Bone Armor (Deathwing)
- Root Cause: Light pigments (like those in Ushabti Bone) are often denser and dry faster, leading to clumping if not thinned correctly or if applied over a wet layer.
- Actionable Fix: Add a drop of Acrylic Glaze Medium to your bone-colored paints. This increases "open time" (drying time) and smooths the pigment distribution. If the texture is already present, lightly sand with 2000-grit sandpaper before re-applying a thinned layer.
"Pooly" or Messy Washes
- Root Cause: Applying a shade wash (like Nuln Oil) too heavily over flat surfaces, causing "coffee staining" or tides as it dries.
- Actionable Fix: Use a "wicking" technique. If the wash pools on a flat plate, immediately clean your brush, dry it on a paper towel, and touch the tip to the pool. The brush will capillary the excess liquid away without disturbing the pigment in the recesses.
Thick, Unsteady Edge Highlights
- Root Cause: Excessive paint on the brush or using the very tip of the bristles on a vertical edge.
- Actionable Fix: "Unload" your brush on a paper towel after dipping it in paint until you can see the individual bristles. Angle the model so you can use the side of the brush against the edge of the plastic. This uses the physical geometry of the model to guide your line.
Decal Silvering (Transfer Bubbles)
- Root Cause: Applying waterslide transfers directly onto matte paint, which has a microscopic texture that traps air.
- Actionable Fix: Apply a gloss varnish to the shoulder pad first to create a perfectly smooth surface. Apply the decal using a setting solution (like Micro Sol), then seal with a matte varnish once dry to kill the shine.
Frequently Asked Questions
Can I paint Dark Angels using only Contrast paints?
Yes, you can achieve a "battle-ready" standard very quickly by priming the model with Grey Seer and applying Dark Angels Green Contrast paint. To elevate this, you must still go back and manually highlight the edges with Moot Green, as Contrast paints tend to settle darkly on the sharpest points of power armor.
Why do some Dark Angels have black armor instead of green?
Dark Angels in the Ravenwing (bikes, land speeders, and flyers) wear black armor as a tradition dating back to the Horus Heresy. Additionally, some "Risen" or Heresy-era models use black armor with red accents. For modern 40k armies, the black armor distinguishes the high-speed reconnaissance wing from the main line infantry.
What is the best color for Dark Angel power weapons?
While many players use traditional "Power Blue," a deep violet or a searing orange provides a striking contrast against the dark green armor. If following the classic box art, a transition from Stegadon Scale Green to Baharroth Blue is the standard technical recommendation.
How do I get a smooth finish on Deathwing bone armor?
Avoid using white primer, as it can be grainier than grey. Start with a solid base of Zandri Dust. The most important factor is using multiple thin coats (often 3 or 4) rather than one thick coat. Using a brown-toned primer like Mournfang Brown can also provide a warm undertone that makes the bone look more natural.
Should I use gold or silver for the metallic details?
Dark Angels traditionally use a mix of both. Gold (Balthasar Gold/Retributor Armour) is used for Chapter symbols and chest Aquilas to denote status, while silver (Leadbelcher) is used for the mechanical parts of the bolter, exhaust vents, and grenades.
Deploy Your Inner Circle
With your techniques refined and your palette prepared, you are ready to bring the sons of the Lion to life on the tabletop. Precision in your edge highlights and patience with your layering will transform your miniatures from simple plastic into a formidable force of the First Legion.