How To Make Bathtub Gin: A Guide To Compound Botanical Infusion

How To Make Bathtub Gin: A Guide To Compound Botanical Infusion

Bathtub Gin: The Hottest Speakeasy In Chelsea NYC

Producing bathtub gin is a historical term for the process of compounding neutral spirits with aromatics, specifically juniper berries, to create a botanical-forward liquor without the use of a traditional copper still. By macerating botanicals in high-proof ethanol and diluting the extract, practitioners can achieve a complex flavor profile that mimics professional dry gin through controlled extraction windows and precise filtration protocols.


Essential Infrastructure and Botanical Selection

The modern interpretation of bathtub gin focuses on the maceration method, where the ethanol acts as a solvent to extract volatile oils from organic material. Success in this process relies heavily on the quality of your base spirit and the freshness of your botanical agents. You are not distilling alcohol; you are infusing it, meaning every compound introduced to the vessel will remain in the final product.



  • Essential Equipment

    • One 750ml clear glass vessel with a hermetic seal.
    • A fine-mesh stainless steel sieve for initial particulate removal.
    • High-quality paper coffee filters or muslin cloth for final polishing.
    • A calibrated measuring cylinder or precision scale for botanical weighing.
    • Opaque secondary storage bottles to prevent light-induced flavor degradation.
  • Raw Materials and Standards

    • Base Spirit: 750ml of high-proof, neutral grain spirit (minimum 40% ABV, ideally 50% for extraction efficiency).
    • Juniper Berries: 2 tablespoons of dried juniper berries (the non-negotiable structural foundation).
    • Supporting Botanicals: 1 teaspoon of coriander seeds, 1/2 teaspoon of angelica root, 1/4 teaspoon of green cardamom pods, and a small strip of dried citrus peel.
    • Duration Benchmark: 24 to 48 hours for primary extraction.
  • Operating Parameters

    • Ambient temperature control: 65 to 72 degrees Fahrenheit.
    • Sanitation: All glassware must be sterilized with boiling water or food-grade sanitizer to ensure no microbial interference alters the botanical profile.

The Systematic Infusion Protocol

The efficiency of your gin depends on the surface area of your botanicals and the timing of their interaction with the ethanol. Follow these steps to ensure a balanced, professional-grade result.



Step 1: Botanical Preparation and Crack Initiation

Before introducing your botanicals to the spirits, you must increase their surface area. Gently crush the dried juniper berries and coriander seeds using a mortar and pestle. Do not grind them into a powder, as this will lead to an overly bitter, murky final product. You are looking for a gentle fracture of the outer husks to allow the ethanol to reach the internal essential oils.

Pro-Tip: If your cardamom pods are particularly fresh, remove the seeds from the pod and use only the seeds to avoid the intense, eucalyptus-like bitterness of the outer pod husk.



Step 2: The Maceration Phase

Combine your spirits and prepared botanicals in the glass vessel. Seal the container tightly and store it in a cool, dark location. Every 12 hours, invert the jar gently to distribute the extracted oils. Do not shake the vessel aggressively, as this can introduce unnecessary oxidation and stir up fine particulates that are difficult to filter later.

Warning: Do not exceed 48 hours of maceration. Prolonged contact with certain roots, particularly angelica or orris root, can introduce woody, soapy off-notes that overwhelm the bright, piney profile of the juniper.



Step 3: Particulate Extraction and Filtration

Once the target time has elapsed, the liquid will have taken on a pale golden or tea-like hue. First, pour the mixture through a stainless steel mesh sieve to remove the bulk botanical matter. Discard these solids immediately. Next, perform a secondary filtration using a paper coffee filter set inside a funnel. This may take several minutes; avoid the urge to squeeze the filter, as pressure will force bitter sediment into your final spirit.



Step 4: Final Dilution and Stabilization

If you started with an overproof spirit, you may need to dilute your gin with distilled water to reach a target drinkability of 40% to 45% ABV. Add water in small increments, checking the clarity as you go. If the spirit turns cloudy, this is known as the Louche effect, which occurs when essential oils come out of solution; a slight chill-filtering can occasionally clear this, though it is usually a sign of high oil concentration.


Bathtub Gin Emails at Anna Beyers blog

Bathtub Gin Emails at Anna Beyers blog

Comparative Analysis of Botanical Profiles



Botanical Class Primary Flavor Driver Dosage Threshold Function in Gin
Juniper Berries Pine/Resin 2 Tbsp / 750ml The structural, medicinal anchor.
Coriander Seed Citrus/Spice 1 Tsp / 750ml Provides a nutty, spicy, mid-palate lift.
Angelica Root Earth/Musk 1/2 Tsp / 750ml Acts as a fixative, binding all other flavors.
Citrus Peel Bright/Acidic 1 Strip / 750ml Brightens the top note; limits juniper bitterness.
Cardamom Floral/Eucalypt 1/4 Tsp / 750ml Adds complexity and aromatic depth.

Post-Procedure Complications and Field Fixes



  • Excessive Bitterness

    • Root Cause: Over-maceration of roots or grinding botanicals too finely.
    • Actionable Fix: Add a pinch of sugar or a small amount of neutral spirit to dilute the intensity of the bitter compounds.
  • Cloudy Final Product

    • Root Cause: Essential oils precipitating during dilution or inadequate filtration.
    • Actionable Fix: Chill the gin for 24 hours at 35 degrees Fahrenheit, then pass it through a fresh, dry coffee filter while cold to trap the solidified oils.
  • Weak Aromatic Profile

    • Root Cause: Using stale or older dried botanicals with low volatile oil content.
    • Actionable Fix: Increase the ratio of juniper berries and coriander by 20% in the next batch; ensure botanicals are purchased from a high-turnover spice merchant.

Frequently Asked Questions



Is it safe to drink bathtub gin?

When using food-grade neutral grain spirits and high-quality dried botanicals, the process is safe, provided you maintain strict sanitation. Unlike illegal distillation, which carries risks of methanol poisoning if poorly executed, this infusion method uses pre-distilled ethanol, eliminating the dangers associated with "still heads."



Can I use vodka as my base spirit?

Vodka is an excellent base for bathtub gin because it is inherently neutral, allowing the botanical flavors to stand out without interference. Ensure you choose a high-proof or premium vodka to provide a clean, high-quality solvent for your infusion.



How long does the finished gin stay shelf-stable?

Because the gin is infused with organic materials, it should be kept in an opaque bottle away from direct sunlight. It will remain at peak flavor for six to twelve months, though the aromatic intensity will naturally taper off over time.



Why does my gin taste like soap?

A soapy flavor profile is almost always the result of over-macerating angelica root or using too much cardamom. If this occurs, reduce the maceration time by 12 hours in your subsequent batches to preserve the delicate, citrus-forward notes of the gin.

Master Your Botanical Infusion

Refining the art of compound gin requires patience, precise measurement, and a commitment to high-quality raw materials. Experiment with these proportions to develop a signature blend that reflects your personal palate preferences.


Bathtub Gin England

Bathtub Gin England

Read also: Shorter layers will be the focus of future long layered hairstyles