How To Export And Process ABO-Compliant Models From ITero Intraoral Scanners

How To Export And Process ABO-Compliant Models From ITero Intraoral Scanners

How to Get ABO Models from Itero ⋆ ctf.bnsf.com

Generating American Board of Orthodontics (ABO) compliant digital models from an iTero scanner requires precise adherence to specific export protocols, ensuring that the final STL or PLY files meet strict diagnostic standards for case submission. Achieving this involves configuring the iTero export settings to output high-resolution, full-arch scans with preserved occlusal detail while ensuring the digital models are properly oriented and free of scan artifacts that would disqualify them from the ABO clinical examination process.


Prerequisites for ABO Digital Model Submission

Before attempting to export or process models for ABO certification, clinicians must ensure their hardware and software ecosystem is aligned with the specific submission requirements of the American Board of Orthodontics. Digital models must be an accurate representation of the patient’s dentition, capturing all surfaces necessary for evaluation, including full arch coverage and accurate bite registration.



  • Essential Hardware: iTero Element series scanner (Element 2, 5D, or Plus series) with an active MyiTero account.
  • System Permissions: Administrative access to the iTero portal to manage case exports and third-party integrations.
  • Technical Standards: Familiarity with the ABO’s current digital model requirements, which typically mandate a high-density mesh and the preservation of patient data privacy in accordance with HIPAA regulations.
  • Time Benchmark: Approximately 10–15 minutes per case to verify scan quality, perform trim adjustments, and finalize the export package.
  • Software Requirements: A compatible STL or PLY viewer or orthodontic software (e.g., Dolphin, OrthoCad, or specialized ABO submission software) to verify the output.

Workflow for Extracting ABO-Ready Digital Models

The transition from a raw chairside scan to an ABO-ready digital model requires a meticulous verification process. Unlike standard restorative exports, ABO models must prioritize structural integrity and anatomic accuracy.



Step 1: Quality Control and Scan Review

Prior to exporting, open the scan in the iTero interface and inspect the full-arch data. Ensure that the scan has captured all necessary anatomy, including the posterior molars and the full mucogingival junction if required. Check for scan artifacts or "noise" that frequently occurs in areas of heavy plaque or saliva.

Warning: Do not attempt to "fill" holes automatically with software tools if it alters the anatomical shape of the teeth or gingival contours; the ABO mandates true-to-life representation.



Step 2: Finalizing the Bite Registration

The ABO requires a functional bite registration. Ensure the bite is locked in the maximum intercuspation (MIP) or the therapeutic position intended for the treatment plan. Verify that the opposing arches are perfectly aligned by checking the occlusal contacts for intersecting geometry.

Pro-Tip: If the bite appears slightly off due to scan inaccuracies, re-scan the buccal bite area specifically to tighten the registration before initiating the export sequence.



Step 3: Configuring the Export Settings

Access the MyiTero cloud portal and locate the specific patient file. Navigate to the "Export" or "Case History" tab. You must select the "STL" or "PLY" format. Choose the "Full Arch" option rather than "Trimmed" to ensure that no critical diagnostic data is truncated by the scanner's automated clipping features. Ensure the coordinate system is set to the default scanner orientation, as the ABO platform will calibrate the orientation upon upload.



Step 4: Verification of File Integrity

Once the files are downloaded, import them into your clinical software. Check the mesh quality to ensure there are no "watertight" issues or non-manifold edges. If your export includes color data (via PLY), verify that the texture mapping is consistent with the physical patient scan.


How Diamond Braces uses iTero for precise 3D models | Diamond Braces ...

How Diamond Braces uses iTero for precise 3D models | Diamond Braces ...

Technical Parameters for Model Submission

When preparing models, it is essential to distinguish between the various export protocols. The following table summarizes the technical specifications necessary to ensure compliance with professional orthodontic board standards.



Technical Parameter Standard Requirement Impact on ABO Compliance
File Format STL (Non-colored) or PLY (Colored) STL is standard; PLY provides added diagnostic depth.
Mesh Density High (Minimum 100k+ polygons) Ensures anatomical accuracy for scoring and measurements.
Clipping/Trimming Minimal (Full Arch preferred) Prevents the exclusion of anatomy critical to ABO diagnostic criteria.
Orientation Standard Anatomical (Occlusal plane parallel) Critical for standardized digital articulation and analysis.
Data Privacy De-identified (Patient ID codes only) Mandatory for compliance with board ethics and HIPAA/GDPR.

Troubleshooting Common Scan and Export Failures

Even with a perfect scan, technical errors during the export process can compromise the submission. Addressing these failures before finalizing the case is essential for a seamless workflow.



  • Root Cause: Insufficient Data Points (Gaps in Scan).

    • Actionable Fix: Use the "Resume Scan" function in the iTero interface to capture missed interproximal areas or posterior distal surfaces before finalizing the export.
  • Root Cause: Incorrect Bite Alignment (Articulator Mismatch).

    • Actionable Fix: Manually re-register the bite in the iTero software using the manual bite-pin tools to ensure the upper and lower arches are seated without overlapping geometry.
  • Root Cause: Corrupted Export File (Incomplete File Transfer).

    • Actionable Fix: Clear your browser cache or use a different high-speed internet connection to re-download the patient case from the MyiTero cloud server to avoid packet loss.

Frequently Asked Questions



Is an STL file sufficient for ABO submission?

Yes, an STL file is a standard requirement for ABO digital model submission as it provides a clear, geometric representation of the dentition. However, ensure the file is exported as a high-density, "open" mesh that reflects the precise anatomy of the patient without excessive filtering by the scanner software.



Should I provide color models or monochrome?

While monochrome STL files are the industry baseline, many clinicians opt for PLY files to provide texture and color information. The ABO accepts both, but PLY files are often preferred as they provide superior visual diagnostic cues regarding gingival health and tooth shade.



Can I use the automated trimming features in iTero?

It is strongly advised to exercise caution with automated trimming features. The ABO scoring system relies on accurate anatomical margins; automated software sometimes crops too close to the teeth, which can obscure critical diagnostic markers. Always prefer a wider, full-arch scan that preserves surrounding anatomy.



How do I handle patient de-identification?

When exporting from MyiTero, use the "Export As" function to assign an internal code or number instead of the patient’s full legal name. This ensures that the digital models remain compliant with privacy standards throughout the board evaluation process.

Streamline Your Board Certification Process

Consistently managing your digital dental records using these established protocols will significantly reduce the administrative burden of your board submissions. Elevate your practice standards by implementing this systematic export workflow today to ensure every digital submission reflects your commitment to clinical excellence.


How to Get Abo Models from Itero: A Complete Step‑by‑Step Guide ...

How to Get Abo Models from Itero: A Complete Step‑by‑Step Guide ...

Read also: The unexpected history of the building housing warman funeral home