How To Forward Calls On A Cisco Phone: The Comprehensive Configuration Guide

How To Forward Calls On A Cisco Phone: The Comprehensive Configuration Guide

Webex App | Forward your phone calls

Forwarding calls on a Cisco IP phone requires executing device-level feature buttons, utilizing Cisco Unified Communications Manager (CUCM) user self-care portals, or applying enterprise-grade FAC (Forced Authorization Codes) and CSS (Calling Search Space) rules. Mastering these methods ensures uninterrupted business communications across enterprise environments, remote offices, and hybrid enterprise telephony architectures.


Pre-Operation & Equipment Checklist

Deploying successful call forwarding rules across a Cisco telephony infrastructure requires verifying hardware compatibility, firmware revisions, and user-level privileges. Understanding the underlying platform architecture whether operating on-premises CUCM, Cisco Unified Communications Manager Express (CUCME), or Webex Calling dictates which configuration path yields optimal results.



  • Essential Gear and Software:

    • Cisco IP Phone hardware model (e.g., Cisco IP Phone 7800 Series, 8800 Series, or older 7900 Series).
    • Active network registration with an enterprise call control platform (CUCM, CUCME, or Webex Cloud).
    • End-User self-care portal credentials or device-level PIN where applicable.
  • Prerequisite Knowledge and Standards:

    • Knowledge of the target forwarding destination number (internal extension or external PSTN number with proper prefix).
    • Familiarity with enterprise dial plans, translation patterns, and external outbound access digits (such as dialing 9 or 8).
    • Verification of line status and permission profiles assigned to the device Class of Service (CoS).
  • Execution Benchmarks:

    • Estimated configuration time: 2 to 5 minutes per device.
    • Required administrative depth: Basic end-user access for on-device steps; administrative privileges required for advanced CUCM bulk templates.

Step-by-Step Call Forwarding Workflows

Executing call forwarding on Cisco hardware can be accomplished directly from the physical handset interface or remotely via administrative web portals. Follow the procedure matching your specific operational context.



Step 1: Direct On-Device Execution via Softkeys



  • Locate the physical Cisco IP phone hardware. Ensure the line is idle and not currently engaged in an active or held call.
  • Press the FwdAll (Forward All) softkey located on the bottom or side of the LCD display screen. You will hear a confirmation beep, and a visual forwarding indicator (usually a right-pointing arrow icon next to the line label) will appear on the screen alongside the destination number field.
  • Enter the destination telephone number exactly as it needs to be dialed by the system. If forwarding to an external number, include any necessary trunk access codes (e.g., dialing 9 followed by the full 10-digit or international number) in accordance with the enterprise dial plan.
  • Press the FwdAll softkey a second time or press the pound key if required by specific firmware iterations to save and lock in the forwarding destination.
  • Verify successful activation by observing the persistent directional arrow icon on the screen and confirming that a test call placed to the extension routes instantly to the designated destination without ringing the local handset.

Pro-Tip: If the destination number fails to ring externally, verify with your system administrator whether your specific phone profile is restricted by a restrictive Calling Search Space (CSS) that blocks outbound PSTN calls from your physical extension.



Step 2: Remote Configuration via Cisco Self Care Portal



  • Open a standard web browser on a workstation connected to the corporate network or via a secure VPN tunnel.
  • Navigate to the corporate Cisco Unified Communications Manager Self Care Portal URL provided by your IT department and log in using your enterprise domain credentials.
  • Locate the My Phones navigation tab at the top of the interface, then select Call Forwarding from the drop-down menu or side panel options associated with your primary hardware extension.
  • Check the activation box for Forward all calls to, and enter the target telephone number or internal extension into the provided text field.
  • Click the Save button at the bottom of the portal page. The web interface will output a green confirmation banner, and the physical Cisco phone display will update within seconds to show the active forwarding status.

Warning: Changing forwarding rules via the Self Care Portal overrides any previously set on-device configurations. Ensure that outbound dialing rules entered in the portal match the exact formatting requirements of your enterprise PBX routing tables.



Step 3: Deactivating Call Forwarding



  • To restore normal operational status from the physical desk phone, press the FwdAll softkey or the dedicated Forward button once while the phone is idle.
  • The directional forwarding icon will disappear from the LCD display screen, and the destination number field will clear, indicating that the device is once again handling incoming calls natively.
  • Alternatively, log back into the Cisco Self Care Portal, uncheck the forwarding activation checkbox, and click Save to clear the rule remotely.

Forward your phone calls

Forward your phone calls

Cisco Call Forwarding Methodologies and Platform Comparison



Platform / Method Primary Interface Best Use Case Destination Flexibility Admin Oversight Required
On-Device Softkey Physical Cisco IP Phone Temporary out-of-office or quick desk changes Internal extensions & standard PSTN None (End-user executable)
Self Care Portal Web Browser / Intranet Remote workers & hybrid schedule updates Internal extensions & external trunk lines Minimal (User login credentials)
CUCM Administration Administrative Dashboard Bulk updates, user relocations, emergency routing Enterprise-wide & multi-site destinations Full Administrator Privileges
CUCME Command Line CLI (Telnet/SSH) Small business router-based telephony Local and remote dial peers Network Engineer Level

Common Site Failures and Field Fixes

Deploying call forwarding across enterprise Cisco networks occasionally presents routing obstructions due to security policies or dial plan misconfigurations. Use these targeted diagnostics to resolve common failures.



  • Symptom: External Call Forwarding Fails with Fast Busy Tone

    • Root Cause: The phone's Calling Search Space (CSS) lacks permissions to route calls externally through the configured gateway or SIP trunk, or the user omitted the required outbound trunk access digit (e.g., 9).
    • Actionable Fix: Update the destination string to include the mandatory external access prefix, or contact your system administrator to modify the device's Calling Search Space in CUCM to permit external PSTN routing.
  • Symptom: The "FwdAll" Softkey is Missing from the Phone Display

    • Root Cause: Device feature control policies configured within CUCM have explicitly disabled on-device call forwarding to enforce centralized enterprise compliance or prevent unauthorized toll diversion.
    • Actionable Fix: Utilize the Cisco Self Care Portal via a web browser to set forwarding rules, or submit a ticket to your telephony administrator to enable softkey templates on your device profile.
  • Symptom: Forwarded Calls Go Directly to Voicemail Instead of the Target Number

    • Root Cause: A conflicting setting such as "Forward Busy" or "Forward No Answer" is overriding the global "Forward All" parameter, or the target extension is unassigned.
    • Actionable Fix: Clear all conditional forwarding settings on the phone, ensure the primary forwarding destination is accurately typed, and test the line status by dialing the target number directly.

Frequently Asked Questions



Can I forward my Cisco desk phone to a mobile phone?

Yes. You can forward your Cisco IP phone to any mobile phone or external landline by entering the full telephone number into the forwarding field. Ensure you include any required outbound enterprise dialing prefixes (such as 9) if your phone system requires an external access code to reach outside lines.



Why won't my Cisco phone let me set up call forwarding?

If the forwarding option is greyed out or missing, your corporate telephony administrator may have disabled on-device feature controls via system-wide security policies. In this scenario, you must log into the Cisco Self Care Portal via your web browser to configure your forwarding rules remotely.



Does call forwarding incur long-distance charges on my enterprise bill?

When you forward a Cisco desk phone to an external phone number, the enterprise PBX places an active outbound call from your office system to the destination number for every incoming call. This means external forwarding can consume trunk channels and incur standard toll or long-distance charges depending on your organization's carrier contract.



Can I set different forwarding destinations for busy versus unanswered calls?

Yes. While "Forward All" routes every incoming call immediately, Cisco Unified Communications Manager supports granular conditional forwarding rules. You can configure separate destinations for "Forward Busy" (when you are already on a call) and "Forward No Answer" (when you do not pick up after a specified ring duration).



How do I know if my Cisco phone is currently forwarding calls?

An active call forwarding status is clearly indicated on the physical phone's LCD screen by a specialized directional arrow icon displayed next to your primary extension line label, often accompanied by the destination phone number or extension text.

Optimize your enterprise voice architecture and empower remote teams by standardizing Cisco call forwarding procedures across your organization today.


Forward Calls App: Unlock The Power Of Call Forwarding!

Forward Calls App: Unlock The Power Of Call Forwarding!

Read also: The latest jenarotor model has a surprising silent running feature