How To Find MAC Address On PS5: Complete Step-by-Step Guide

How To Find MAC Address On PS5: Complete Step-by-Step Guide

How to Port Forward for PlayStation 5 | Open ports for PS5

Finding the Media Access Control (MAC) address on your PlayStation 5 is essential when configuring router settings, bypassing captive portals in hotels or dormitories, or setting up static IP reservations. This unique 12-character hardware identifier can be located directly within the system settings menu in under a minute, regardless of whether you are utilizing a wired Ethernet connection or a wireless Wi-Fi network.


Preparing to Locate Your PlayStation 5 Hardware Identifiers

Before diving into the system settings of your console, it helps to understand what a MAC address is and why your PlayStation 5 actually has more than one. A MAC address consists of six pairs of hexadecimal digits separated by colons or hyphens, such as 00:1A:2B:3C:4D:5E. Because the PlayStation 5 supports both hardwired Ethernet connections and wireless local area networks (WLAN), the console features two distinct MAC addresses: one dedicated to the Ethernet port and another assigned to the Wi-Fi module.

Identifying the correct address depends entirely on how your console communicates with your network infrastructure. If you plan to plug an Ethernet cable directly from your router or switch into the back of your PS5, you must capture the LAN MAC address. Conversely, if your console connects to your home router over the 2.4 GHz or 5 GHz frequency bands, the Wi-Fi MAC address is required.



  • Essential Gear and Tools: A functioning PlayStation 5 console, an active display monitor or television, and the DualSense wireless controller.
  • Mandatory Prerequisite Knowledge: Familiarity with navigating the PS5 user interface dashboard and basic understanding of your home network setup.
  • Estimated Duration and Cost: Less than 2 minutes of active execution time at zero financial cost.

Step-by-Step Procedure to View Your PS5 MAC Address



Step 1: Power On and Access the System Settings

Boot up your PlayStation 5 using your DualSense controller and wait for the main user interface dashboard to load. Once you reach the primary home screen, navigate to the top right corner and select the gear icon to open the Settings menu.

Pro-Tip: You can quickly access the settings menu by pressing the PlayStation button on your controller to bring up the control center, though navigating directly from the home screen remains the most foolproof method.



Step 2: Navigate to the Network Menu

Inside the main Settings menu, scroll down the list of options until you locate the Network category. Press the X button on your controller to open the Network settings submenu, which manages all internet connections, connection status tests, and setup configurations.



Step 3: Open Connection Status

Within the Network menu, ensure you are on the Connection Status tab, which is typically the default view. Scroll down the panel using the directional pad or left analog stick until you see the option labeled View Connection Status. Select this option to generate a comprehensive diagnostic readout of your current network configuration.



Step 4: Locate Your MAC Addresses on the Screen

Scroll through the detailed connection status overlay window until you find the hardware identification entries. Here, you will see both the MAC Address (LAN) and the MAC Address (Wi-Fi) clearly displayed side-by-side or stacked vertically, depending on your current system software version.

Warning: Never share your console's MAC address publicly on forums or social media. While MAC addresses can be spoofed, exposing your hardware identifiers can occasionally lead to targeted localized network disruptions.


[Guide] How To Find Your Ps4 Mac Address Very Quickly - LZRNN

[Guide] How To Find Your Ps4 Mac Address Very Quickly - LZRNN

PlayStation 5 Network Interface Specifications and Identification Matrix



Parameter / Feature LAN (Ethernet) Interface Wi-Fi (WLAN) Interface
Physical Medium RJ-45 Category 5e/6/7 Copper Cable Radio Frequency (2.4 GHz / 5 GHz)
Maximum Link Rate Up to 1 Gbps (Gigabit Ethernet) Varies by router standard (Wi-Fi 6 capable)
Primary Identifier Label MAC Address (LAN) MAC Address (Wi-Fi)
Primary Use Case Static IP mapping, hardware firewall rules Captive portal bypass, wireless isolation bypass

Troubleshooting Common PlayStation 5 Network Visibility Issues



Console Fails to Display Connection Status Readouts



  • Root Cause: The system software may be experiencing a temporary caching glitch or firmware unresponsiveness after waking from Rest Mode.
  • Actionable Fix: Restart your PlayStation 5 completely by holding down the physical power button on the console until it beeps twice, then boot it back up and retrace your steps to the Network menu.


Confusion Regarding Which MAC Address to Input into the Router



  • Root Cause: Inputting the wireless MAC address while the console is plugged into a wired Ethernet switch, or vice versa, resulting in connection failure.
  • Actionable Fix: Double-check your physical setup; if an Ethernet cable is plugged into the back of your console, use the LAN MAC address exclusively for any MAC filtering or DHCP reservation rules.


Unable to Access Router Settings to Input the MAC Address



  • Root Cause: Lack of administrative credentials for the home router or gateway provided by your Internet Service Provider (ISP).
  • Actionable Fix: Locate the sticker physically attached to the housing of your home router to find the default gateway IP address, username, and password, or contact your ISP support line for administrative assistance.

Frequently Asked Questions



Can I change or spoof my PS5 MAC address?

Unlike personal computers running Windows or macOS, the PlayStation 5 operating system does not natively allow users to alter, spoof, or modify hardware MAC addresses. The identifiers are hardcoded into the network interface controllers at the manufacturing factory.



Why does my PS5 have two different MAC addresses?

Your console contains two separate physical network interface cards: one dedicated strictly to hardwired Ethernet cables and another dedicated to wireless Wi-Fi signals. Each distinct hardware component requires its own unique network identifier to communicate properly on a local area network.



Where can I find the MAC address if my PS5 won't boot up?

If your console suffers from a display failure or won't boot past the initial loading screen, you can find the LAN MAC address printed directly on the official barcode sticker located on the exterior casing of the PlayStation 5 console.



Do I need the MAC address to connect my PS5 to a standard home Wi-Fi network?

No, standard home Wi-Fi networks utilizing standard WPA2 or WPA3 security protocols do not require your MAC address. You simply need to select your network name from the list and enter your correct wireless password. MAC addresses are primarily needed for enterprise networks, hotel portals, or advanced router configurations.



How do I set up a static IP using the PS5 MAC address?

Once you have retrieved your MAC address from the system settings, log into your router's administrative web portal via a browser. Navigate to the LAN setup, DHCP settings, or Address Reservation section, pair your PS5's specific MAC address with your desired static IP address, and save the configurations.

Optimize your home network performance and secure your gaming sessions by correctly identifying your console's hardware parameters today.


How to find mac address on pc wifi - kidsas

How to find mac address on pc wifi - kidsas

Read also: The surprising secret to getting a deal at Kays Jewelers