How To Fill In A Pool: The Complete Engineering And Excavation Guide

How To Fill In A Pool: The Complete Engineering And Excavation Guide

How to Fill In an Inground Pool

Filling in an inground or above-ground pool requires strict adherence to local geotechnical standards, proper structural demolition, and controlled soil compaction to prevent catastrophic ground subsidence. Neglecting critical drainage channels, failing to puncture the pool shell, or using uncertified fill materials invariably leads to sinkholes, standing water, and ruined property values.


Pre-Operation & Equipment Checklist

Executing a pool removal project permanently alters the hydrogeology and load-bearing capacity of your residential lot. Whether you are abandoning a concrete (gunite), vinyl-liner, or fiberglass shell, you must approach the task as a major civil engineering project rather than a simple landscaping chore.



  • Essential Gear, Tools, and Materials: 300-series excavator or mini-loader, pneumatic jackhammer or concrete saw, geotextile fabric, crushed stone (AASHTO #57 or ¾-inch minus gravel), clean structural fill dirt (sandy loam mix), vibratory plate compactor or heavy roller, and a soil testing probe.
  • Prerequisite Knowledge and Standards: Verification of municipal demolition permits, mandatory utility locate (call 811 before digging), and compliance with local frost line depths and structural backfill compaction requirements (typically achieving 90% to 95% Standard Proctor density).
  • Budget and Duration Benchmarks: Financial investments range from 3,000 to 10,000 USD depending on accessibility and shell type, while physical execution generally spans 3 to 7 days of labor and machinery operation.

Step-by-Step Structural Demolition and Backfill Workflow



Step 1: Securing Permits and Utility Disconnects

Before bringing heavy machinery onto your property, contact your local municipal building department to pull a pool demolition permit. Concurrently, schedule a public utility locate to flag underground gas, water, electric, and communication lines. Hire a licensed electrician or plumber to permanently cap, seal, and disconnect all electrical lines running to the pool pump, heater, and underwater lighting, as well as any supply and return plumbing lines.

Warning: Never cut or bury live electrical conduits. Ensure all circuits are deactivated at the main breaker panel and verified with a voltage meter before proceeding with excavation.



Step 2: Shell Perforation and Drainage Preparation

Water must never be allowed to pool inside the abandoned basin, which creates a hydraulic pressure head that can lift the entire structure out of the ground (floating the pool) or cause stagnant, insect-breeding hazards.



  1. Drill or jackhammer a minimum of six to ten strategic drainage holes through the deepest points of the pool floor, spaced evenly across the bottom slab.
  2. Punch large holes through the lower walls and steps of the basin to allow groundwater and seasonal rainwater to escape freely into the surrounding native soil.
  3. Excavate drainage trenches around the exterior of the lowest zones if the native soil has poor permeability, backfilling these trenches with washed crushed stone wrapped in non-woven geotextile fabric to act as a French drain network.


Step 3: Partial Demolition Versus Complete Removal

Decide whether you are executing a partial fill (collapse) or a complete excavation based on local real estate disclosure laws and future landscaping plans.



  1. For a partial removal, use a hydraulic hammer to break down the upper pool walls to a depth of at least 24 to 36 inches below the final proposed grade line.
  2. Push all broken concrete, brick, and heavy structural debris directly into the bottom of the deep end to serve as a stable, dense foundation matrix.
  3. For a full removal, completely hoist the concrete shell, fiberglass unit, or steel walls out of the excavation pit and haul the materials off-site to an authorized construction and demolition waste recycling facility.


Step 4: Layered Backfilling and Compaction Management

Filling a massive subterranean void requires meticulous lift management to prevent future settling, sinkholes, and structural shearing.



  1. Lay down an initial 12-inch lift of clean, angular crushed stone directly over the perforated floor and demolished debris to lock the base and facilitate sub-surface water migration.
  2. Introduce approved structural fill dirt in horizontal lifts not exceeding 8 to 12 inches in thickness.
  3. Drive a heavy vibratory plate compactor or riding roller over each individual lift, adding controlled amounts of moisture to achieve optimum soil density without saturating the material.

Pro-Tip: Overfill the final grade by approximately 4 to 6 inches higher than the surrounding lawn to account for natural settlement and soil compaction over the subsequent 12 to 24 months.


Filling In a Swimming Pool in South Austin - Austin Demolition Services

Filling In a Swimming Pool in South Austin - Austin Demolition Services

Comparative Material Performance Matrix for Pool Backfill



Backfill Material Drainage Efficiency Compaction Density Cost Factor Settlement Risk Best Engineering Application
Crushed Stone (#57) Excellent High (Interlocking) High Minimal Bottom drainage layer and bridging voids
Sandy Loam Soil Moderate High (Proctor-rated) Low-Moderate Low Primary bulk fill for middle and upper lifts
Dense Graded Aggregate Low-Moderate Maximum Moderate Very Low Sub-base preparation for surface structures
Native Clay Soil Poor Variable Free (On-site) High Strongly discouraged due to expansion/shrinkage

Common Site Failures and Field Fixes

Even with careful planning, unexpected subterranean shifts can occur after a pool has been filled in. Recognizing early warning signs protects your investment and prevents long-term yard degradation.



  • Root Cause: Localized depressions or sinkholes forming across the surface of the former pool footprint.

    • Actionable Fix: This indicates that organic debris trapped inside the basin has decayed, or a void pocket collapsed due to uncompacted soil bridging. Excavate the depressed area down to solid ground, inject flowable fill or pack with crushed stone, and re-layer with compacted soil.
  • Root Cause: Standing water or saturated, swampy turf directly over the filled pool area.

    • Actionable Fix: The pool shell failed to drain properly, creating an underground bathtub effect that traps surface runoff. Install a vertical relief drain or bore through the remaining lower pool wall to connect the trapped basin volume to the municipal storm system or a daylight gravity outlet.
  • Root Cause: Severe structural cracking or displacement of adjacent hardscapes, patios, or home foundations.

    • Actionable Fix: Inadequate lateral soil compaction or improper lift sequencing caused lateral ground slippage. Hire a geotechnical engineer to perform dynamic cone penetrometer testing and inject expanding structural polyurethane foam to stabilize the surrounding sub-grade.

Frequently Asked Questions



Do I need a permit to fill in a swimming pool?

Yes, nearly all municipal building and zoning departments require a formal demolition and grading permit to fill in a swimming pool. This ensures compliance with local environmental codes, utility setbacks, tax assessments, and proper handling of abandoned underground structures.



Is it better to completely remove a pool or just fill it in?

Complete pool removal involves lifting and hauling away the entire shell, which is more expensive but eliminates future real estate disclosure liabilities and allows unrestricted future building. Partial removal involves punching holes in the floor, breaking down the upper walls, and backfilling, which is cost-effective but must be disclosed to future home buyers.



Can I build a patio or house addition over a filled pool?

You generally cannot build heavy structures such as home additions, garages, or masonry outdoor kitchens directly over a filled pool without deep foundation piers anchored into undisturbed native load-bearing soil. Building lightweight patios, decks, or soft landscaping is usually permissible after the backfill has fully settled.



How long does it take for filled pool soil to completely settle?

Natural soil settlement typically takes between 12 to 24 months, encompassing at least one full cycle of heavy seasonal rains and freeze-thaw periods. Overfilling the site slightly above grade helps manage this settling process until the ground stabilizes permanently.

Professional Consultation for Your Pool Removal Project

Transforming your unused swimming pool into a stable, usable lawn requires precise engineering, heavy equipment operation, and compliance with local environmental regulations. Contact our licensed site-preparation specialists today to schedule a comprehensive geotechnical assessment and receive a custom estimate for your pool demolition project.


How to Reduce the Cost of Filling a Swimming Pool

How to Reduce the Cost of Filling a Swimming Pool

Read also: Hair Short In Back Long In Front