How To Cut A Railroad Tie: Professional Methods For Landscape And Structural Timber

How To Cut A Railroad Tie: Professional Methods For Landscape And Structural Timber

How To Install Railroad Tie Steps at Eden Disney blog

Cutting a railroad tie requires heavy-duty cutting equipment—typically a large gas-powered chainsaw or a circular saw with a carbide-tipped blade—due to the dense hardwood and toxic creosote preservation. Because these reclaimed timbers are often impregnated with heavy oils and embedded with grit, stones, or hidden metal spikes, success relies on proper safety gear, aggressive blade selection, and a methodical step-by-step cutting process.


Essential Preparation and Equipment Setup for Timber Sourcing

Reclaimed railroad ties are exceptionally heavy, abrasive, and structurally rigid. Before starting any cutting operations, you must gather specialized tools and Personal Protective Equipment (PPE) designed to handle dense creosote-treated oak or mixed hardwoods. Standard consumer-grade tools will quickly bog down, overheat, or suffer permanent damage when encountering the abrasive surface minerals and internal stresses locked inside these architectural timbers.



  • Essential Gear, Tools, and Materials:

    • Gas-powered chainsaw (minimum 18- to 20-inch bar length, though a 24-inch bar is preferred for full pass-through cuts on 7x9-inch ties).
    • Low-kickback rip chain or a standard semi-chisel chain kept exceptionally sharp.
    • Carbide-tipped reciprocating saw blades (as an alternative for precision notch cuts, paired with a heavy-duty corded reciprocating saw).
    • Heavy-duty sawhorses or stable timber cribbing to support the weight.
    • Long-handled flathead screwdriver or pry bar (for clearing debris).
    • Metal detector or strong magnetic sweeper.
    • PPE: Heavy leather work gloves, safety glasses, a full face shield, steel-toe boots, hearing protection, and a dual-cartridge respirator rated for organic vapors and particulate dust.
  • Mandatory Prerequisite Knowledge and Standards:

    • Railroad ties standard dimensions are typically 7 inches thick by 9 inches wide, and 8.5 feet long.
    • Old ties frequently contain embedded iron rail anchors, spikes, or stone ballast fragments that will instantly destroy a saw chain upon impact.
    • Creosote emits harmful smoke and toxic particulate matter when heated by friction; cutting must always occur in a well-ventilated outdoor environment.
  • Estimated Budget and Duration Benchmarks:

    • Time commitment: Expect 5 to 10 minutes of active cutting per tie, excluding setup and inspection time.
    • Financial investment: If you already own a professional-grade chainsaw and safety gear, expect to spend approximately twenty to forty dollars on specialized carbide blades, fuel, and bar oil.

Step-by-Step Procedure for Cutting Railroad Ties Safely



Step 1: Inspect and Scan the Timber for Hidden Metal

Before making any physical contact with a cutting tool, lay the railroad tie flat across stable supports and conduct a thorough visual and mechanical inspection. Scan the entire length of the timber—including the ends and underside—using a high-powered hand-held metal detector or strong rare-earth magnet to locate deeply embedded railroad spikes, anti-split S-irons, or gravel fragments.

Warning: Hitting a hidden steel railroad spike with a high-speed chainsaw blade causes catastrophic chain derailment, severe kickback, and dangerous flying shrapnel. Always clear a wide buffer zone around your workspace.



Step 2: Mark Precise Cut Lines on Multiple Faces

Measure your required length using a heavy-duty carpenter's square and a bright construction crayon or chalk line. Because railroad ties are rarely uniform, perfectly straight, or square along their edges, you must wrap your cut lines around all four sides (top, bottom, and both vertical flanks) to maintain a straight tracking path during the cut.

Pro-Tip: Score the lumber along your chalk line with a utility knife or circular saw blade depth-stop before running your chainsaw. This severs surface wood fibers and prevents the creosote-laden outer shell from splintering or tearing raggedly.



Step 3: Secure the Workpiece for Stability

Position the railroad tie securely across two heavy-duty steel sawhorses or timber cribbing blocks, ensuring that the cut-off end has adequate clearance to drop free without pinching the saw blade. Never attempt to cut a tie while it is resting directly on rocky ground or unsupported in the middle, as gravitational sag will bind the blade midway through the pass.



Step 4: Execute the Primary Cut with Proper Stance

Adopt a wide, stable athletic stance with your body positioned entirely out of the direct line of potential chainsaw kickback. Start your saw, bring it to full throttle, and approach the timber smoothly, utilizing the bottom of the guide bar close to the engine housing (the bumper spikes) for maximum control. Maintain a steady, downward feed rate without forcing the saw, allowing the teeth to clear out the dense, stringy wood chips efficiently.



Step 5: Finish and Clean the Cut Surfaces

Complete the cut cleanly by letting the saw exit the bottom face of the timber under controlled power, then immediately release the throttle. Inspect the freshly exposed interior wood for any structural rot, insect damage, or lingering metal fragments before utilizing the cut timber in your landscaping retaining wall or raised garden bed.


MODEL RAILROAD TIES for Lionel O Gauge/scale Tubular Train Track | 100 ...

MODEL RAILROAD TIES for Lionel O Gauge/scale Tubular Train Track | 100 ...

Technical Specifications and Material Properties of Railroad Ties

Understanding the physical characteristics and grading parameters of structural timbers helps determine the correct cutting approach and project suitability.



Parameter Standard Creosote-Treated Oak Tie Creosote-Treated Mixed Hardwood Tie Creosote-Free Eco-Alternative Tie
Typical Dimensions 7" Thickness x 9" Width x 8.5' Length 7" Thickness x 9" Width x 8.5' Length 6" Thickness x 8" Width x 8' Length
Average Weight 170 to 200 Pounds 150 to 180 Pounds 80 to 120 Pounds
Saw Blade Requirement Professional Chainsaw / Carbide Tip Professional Chainsaw / Carbide Tip Standard Woodworking Saw / Carbide Tip
Chemical Treatment Heavy Coal-Tar Creosote Heavy Coal-Tar Creosote Borate or Copper Naphthenate
Expected Lifespan 30 to 40+ Years Underground 25 to 35 Years Underground 15 to 25 Years Underground

Common Site Failures and Field Fixes



  • Root Cause: The chainsaw blade pinches tightly in the middle of the cut due to internal wood tension or gravitational sagging of the unsupported timber ends.

    • Actionable Fix: Stop cutting immediately, back the saw out carefully, and drive a steel or plastic wedge into the top kerf behind the blade to hold the wood fibers apart while you finish the pass.
  • Root Cause: Heavy creosote smoke, black tar buildup, and excessive friction quickly dulls the saw chain teeth and gums up the guide bar groove.

    • Actionable Fix: Increase your bar and chain oil flow rate, clean the guide bar rail frequently with a groove-cleaning tool, and switch to a low-profile carbide-tipped chain designed for abrasive materials.
  • Root Cause: The exterior surfaces of the tie are caked in dry mud, sand, and tiny rock particles that instantly strip the sharpness from fresh saw teeth upon entry.

    • Actionable Fix: Scrub the intended cutting path vigorously with a stiff wire brush or pressure washer to remove all surface grit before starting the engine.

Frequently Asked Questions



Can I cut a railroad tie with a standard hand saw?

While it is technically possible to cut a railroad tie with a large crosscut hand saw, the extreme density of seasoned hardwood combined with the sticky, tar-like creosote impregnation makes manual sawing exhausting and virtually impractical for standard projects. Power equipment such as a gas chainsaw or heavy-duty reciprocating saw is strongly recommended.



Is it safe to use old railroad ties for raised vegetable garden beds?

Most reclaimed railroad ties are treated with coal-tar creosote, a heavy industrial pesticide and wood preservative containing toxic polycyclic aromatic hydrocarbons (PAHs). Horticultural and agricultural safety guidelines advise against using creosote-treated wood for edible vegetable gardens because the chemicals can leach into the surrounding soil and be absorbed by root crops.



How do I protect myself from toxic creosote dust when cutting?

Always wear a tight-fitting dual-cartridge respirator rated for organic vapors and fine particulates, alongside wrap-around safety glasses and protective clothing. Never burn scrap pieces of railroad ties in a fire pit or wood stove, as burning releases toxic, carcinogenic smoke.



What is the best way to dispose of leftover railroad tie scraps?

Because of chemical treatment regulations, railroad ties cannot be burned or disposed of in standard municipal yard waste collection streams. Check with your local waste management facility or landfill to find out their specific drop-off guidelines and hazardous material disposal fees for treated industrial wood products.

Ensure the structural integrity of your outdoor projects by utilizing proper tools, premium safety gear, and precision cutting techniques every time you handle heavy industrial timber.


Ultimate Railroad Tie Connectors: Secure, Durable, and Easy-to-Install ...

Ultimate Railroad Tie Connectors: Secure, Durable, and Easy-to-Install ...

Read also: Ohio Bmv Alliance