How To Clean And Restore Ivory Piano Keys: The Professional Conservator’s Guide

How To Clean And Restore Ivory Piano Keys: The Professional Conservator’s Guide

Say no to messy stickers! Introducing, The Piano Rake® | How to play ...

Cleaning ivory piano keys requires a meticulous, low-moisture approach to preserve the porous organic structure of the dentin while removing accumulated sebum and environmental pollutants. Successful restoration involves utilizing mild pH-neutral surfactants, gentle mechanical abrasives, and controlled ultraviolet exposure to achieve a target brightness without compromising the structural integrity of the key-top adhesive or the wood substrate.


Pre-Restoration Assessment and Material Inventory

Before initiating any cleaning protocol, you must verify that the key surfaces are indeed genuine ivory and not a synthetic analog like celluloid (Ivorine) or modern acrylic. Genuine ivory keys are typically constructed in three distinct pieces: the head, the tail, and the front. Upon close inspection under a magnifying glass, you should observe "Schreger lines"—fine, cross-hatched patterns or grain lines similar to those found in wood or a fingerprint. Because ivory is a porous, organic material derived from elephant tusks, it behaves more like bone or a tooth than plastic. It breathes, absorbs oils from human skin, and reacts aggressively to fluctuations in humidity and excessive moisture.

The cleaning environment must be stabilized at a relative humidity between 40% and 50% to prevent the ivory from warping or "checking" (developing fine cracks). Attempting to clean ivory in an overly dry or excessively damp environment can lead to the delamination of the ivory from the wooden key lever.



Essential Equipment and Materials



  • Cleaning Agents: Plain white, non-gel, non-whitening toothpaste (avoiding those with silica beads or blue dyes) or a specialized pH-neutral ivory cleaner.
  • Solvents: High-purity distilled water and 99% isopropyl alcohol (to be used sparingly).
  • Abrasives: 0000-grade (super fine) steel wool or a white jeweler’s rouge.
  • Applicators: Lint-free microfiber cloths, high-quality flannel strips, and soft-bristled surgical brushes.
  • Safety Gear: Nitrile gloves to prevent the transfer of new skin oils during the cleaning process.
  • Lighting: A high-intensity UV lamp or access to indirect natural sunlight.


Estimated Benchmarks



  • Budget: $25 – $75 for high-grade materials.
  • Duration: 2 to 4 hours for a standard 88-key keyboard, excluding UV bleaching time.
  • Prerequisite: Ability to identify "checks" or loose ivory plates that require re-gluing before cleaning.

The Systematic Ivory Cleaning and Whitening Protocol

The following steps transition from the least invasive to more intensive mechanical cleaning. Always test any method on the lowest A or highest C key before proceeding to the center of the keyboard.



Step 1: Dry Contaminant Removal

Before introducing any liquids, you must remove loose dust, skin flakes, and particulate matter. If moisture is applied prematurely, these particles can turn into an abrasive paste or be driven deeper into the porous grain of the ivory.



  1. Use a soft-bristled brush or a vacuum with a brush attachment to gently sweep the gaps between the keys.
  2. Wipe each key individually with a dry microfiber cloth, moving from the back of the key (near the fallboard) toward the front to prevent pushing debris into the action.
  3. Inspect the "heads" and "tails" for any chips or loose pieces.

Warning: Never use canned compressed air. The propellant can leave a chemical residue or cause localized freezing, which leads to immediate thermal shock and cracking in old ivory.



Step 2: Targeted Moisture Application

Ivory reacts poorly to standing water. The goal is to use a "damp-dry" technique where the cloth is barely moistened. Excess water can seep into the joints where the head and tail meet, dissolving the traditional water-soluble hide glue used in vintage pianos.



  1. Lightly moisten a white flannel cloth with a solution of distilled water and a single drop of mild, pH-neutral soap.
  2. Wring the cloth until it feels almost dry to the touch.
  3. Wipe a single key at a time. Immediately follow with a second, completely dry cloth to remove any residual moisture.
  4. If a key remains stained, you may use a very small amount of white, non-gel toothpaste. Apply a pea-sized amount to the cloth, rub the key gently in the direction of the grain, and "rinse" with a damp cloth before drying.

Pro-Tip: If the ivory is exceptionally dirty, some technicians use a small amount of whole milk. The lactic acid and fats can gently lift dirt, but this must be followed by a thorough wipe-down with distilled water to prevent the milk from souring in the pores.



Step 3: Mechanical Polishing and Leveling

Over decades, ivory keys develop "valleys" or wear patterns from the pianist's fingers. If the surface is deeply yellowed or scratched, mechanical leveling may be necessary. This should only be performed on ivory of sufficient thickness.



  1. Using 0000-grade steel wool, gently buff the surface of the ivory in a linear motion. This removes the oxidized top layer of the material.
  2. Ensure you do not buff the sharp edges of the keys too aggressively, as this can round them off and ruin the "feel" of the keyboard.
  3. Clean away all metal fragments from the steel wool immediately with a magnet or a vacuum, as these can rust and cause permanent orange staining if moisture is introduced later.


Step 4: UV Photochemical Whitening

Unlike plastic, which yellows when exposed to sunlight (due to bromine flame retardants), ivory actually whitens when exposed to UV light. This is a photochemical reaction that bleaches the organic pigments.



  1. Open the piano’s fallboard and expose the keys to indirect, bright sunlight for several hours a day.
  2. For faster results, position a professional-grade UV lamp over the keyboard. Ensure the lamp is far enough away to prevent heat buildup; heat is the primary enemy of ivory stability.
  3. Continue this process for several days until the desired shade of white is achieved.

Warning: Do not leave the piano in direct, hot sunlight for extended periods. The heat can dry out the wooden soundboard and pinblock, leading to catastrophic tuning instability and structural cracks.


Cleaning Electric Piano Keys at Enrique Ivy blog

Cleaning Electric Piano Keys at Enrique Ivy blog

Comparative Material Analysis and Chemical Tolerances

Understanding how ivory reacts compared to its common substitutes is vital for preventing accidental damage. Use the following table to calibrate your cleaning intensity based on the specific material of your piano.



Feature Genuine Ivory Celluloid (Ivorine) Modern Acrylic/Plastic
Pore Structure Highly porous (organic) Non-porous (synthetic) Non-porous (synthetic)
Grain Pattern Schreger lines (cross-hatch) Parallel lines or uniform No grain/homogenous
UV Reaction Whitens/Bleaches Yellows/Degrades Stable/Minimal change
Alcohol Tolerance Low (can cause desiccation) Moderate (short exposure) High
Heat Sensitivity High (cracks/warps) Extremely High (flammable) Moderate (melts)
Recommended Cleaner Dry buff/Paste/Milk Isopropyl Alcohol/Soap Mild Detergent/Windex

Remediating Common Ivory Degradation Scenarios

Even with careful maintenance, vintage ivory keys often suffer from environmental and mechanical failures. Addressing these requires a combination of chemical knowledge and woodworking precision.



  • Scenario: Yellowing Despite Regular Cleaning



    • Root Cause: Lack of light exposure. Ivory contains organic compounds that darken when kept in the dark (the "dark yellowing" phenomenon).
    • Actionable Fix: Increase exposure to UV light. Keep the fallboard open during the day in a well-lit room. Avoid "whitening" chemicals like bleach, which will destroy the organic fibers and cause the ivory to crumble.
  • Scenario: Detached Ivory Plates (Delamination)



    • Root Cause: Failure of the underlying hide glue due to high humidity or excessive cleaning moisture.
    • Actionable Fix: Scrape the old glue off both the wooden key and the underside of the ivory. Use a dedicated ivory cement or a white-tinted PVC-E glue. The white tint is crucial because ivory is translucent; using clear or dark glue will make the key look grey or muddy.
  • Scenario: "Checking" or Fine Surface Cracks



    • Root Cause: Rapid fluctuations in temperature and humidity causing the organic material to expand and contract faster than the wood.
    • Actionable Fix: These cannot be "filled" invisibly. The best approach is to stabilize the environment using a piano humidity control system (e.g., Dampp-Chaser). If the cracks are dirty, clean them gently with a soft brush and 99% alcohol to lift the dirt without swelling the wood.
  • Scenario: Persistent "Sticky" Residue



    • Root Cause: Accumulation of skin oils (sebum) mixed with household dust or previous improper cleaning agents (like wax-based polishes).
    • Actionable Fix: Use a 50/50 mixture of distilled water and white vinegar applied to a cloth. The acidity of the vinegar breaks down the oils. Wipe dry immediately to prevent the acid from etching the ivory surface.

Frequently Asked Questions



Can I use bleach to whiten ivory piano keys?

Never use liquid bleach or hydrogen peroxide solutions directly on ivory. These harsh chemicals break down the protein bonds within the ivory, leading to "chalking," where the surface becomes brittle, loses its luster, and eventually disintegrates into a powder.



How do I tell the difference between ivory and Ivorine?

Observe the grain under a 10x jeweler's loupe. Ivory features irregular, organic Schreger lines that look like a cross-hatched "V" shape. Ivorine, an early plastic, usually has perfectly parallel lines intended to mimic grain, or it may have no grain at all and smell like camphor if rubbed briskly with a finger.



Is it legal to repair or replace ivory keys?

Laws regarding ivory vary by jurisdiction, but generally, under CITES and the U.S. Endangered Species Act, "de minimis" exceptions exist for antique instruments. You can legally clean and repair existing ivory, but selling or shipping ivory across international borders requires specific "Musical Instrument Certificate" documentation.



Why is it important to use non-gel toothpaste?

Gel toothpastes often contain artificial dyes and moisturizing agents that can penetrate the pores of the ivory and cause permanent staining. Plain white toothpaste acts as a very fine abrasive, similar to a polishing compound, which is safe for organic surfaces when used sparingly.



Should I oil my ivory keys to prevent cracking?

No, you should never apply lemon oil, mineral oil, or furniture polish to ivory. These oils will soak into the pores, turn rancid over time, and cause the ivory to turn a permanent, sickly translucent yellow or brown that cannot be reversed.

Professional Piano Restoration Consultation

Preserving the touch and aesthetic of a vintage instrument requires a balance of chemical precision and historical respect. For owners of high-value heirloom pianos, consulting with a certified piano technician ensures that restoration efforts maintain both the playability and the appraisal value of the ivory keyboard.


How To Clean Piano Keys Ivory - #5 a Story for You

How To Clean Piano Keys Ivory - #5 a Story for You

Read also: Map of Brooklyn NYC with neighborhoods shows a shift in rent prices