How To Clean A Jura Coffee Machine: The Ultimate Professional Maintenance Guide

How To Clean A Jura Coffee Machine: The Ultimate Professional Maintenance Guide

Breville, Jura Espresso Machine Cleaning Tablets (100ct) - Clear Cafe ...

Maintaining a Jura coffee machine requires a disciplined adherence to its automated hygiene cycles and the use of specialized phosphate-free chemicals to preserve the thermoblock and brewing unit. By executing the integrated cleaning, descaling, and milk system rinsing protocols at the precise intervals prompted by the Intelligent Water System (I.W.S.), you ensure a consistent 15-bar extraction pressure and extend the operational lifespan of the internal components.


Technical Preparation and Component Checklist

Before initiating any maintenance protocol on a Jura E, S, Z, or GIGA series machine, you must understand that these units are engineered with a non-removable brewing group. Unlike lower-tier espresso machines where the brew group is rinsed under a tap, Jura utilizes a high-temperature centrifugal cleaning process. This necessitates specific OEM (Original Equipment Manufacturer) supplies formulated to interact with the internal piping without causing polymer degradation or metallic corrosion.



Essential Maintenance Kit and Requirements



  • Jura 3-Phase Cleaning Tablets: These are mandatory for the "Clean" cycle. They do not just remove coffee oils; they provide a protective layer that retards the accumulation of future lipids.
  • Jura Milk System Cleaner (Mini-Tabs): Essential for dissolving milk proteins and fats within the frother and dual spout.
  • CLARIS Smart/Smart+ Filter Cartridges: These use an RFID chip to communicate with the machine's Intelligent Water System (I.W.S.) to monitor filter exhaustion.
  • Jura Descaling Tablets: Only required if the machine is operated without a CLARIS filter or if the water hardness setting is exceptionally high.
  • Microfiber Cloths: For the chrome-plated or glass-fronted surfaces to avoid micro-abrasions.
  • Estimated Duration: Daily milk cleaning (2 minutes), Full system cleaning (15–20 minutes), Descaling (45 minutes).
  • Budget Benchmark: Expect an annual maintenance spend of $100–$150 USD for genuine consumables to maintain warranty compliance.

Comprehensive Maintenance Workflow and Execution

The Jura cleaning process is segmented into three distinct technical layers: the milk system, the brewing circuit, and the hydraulic system. Each requires a different chemical approach and physical intervention.



Step 1: Automated Milk System Hygiene

The milk system is the most prone to bacterial growth due to the presence of lactose and fats. Jura machines utilize a specialized cleaning container designed to facilitate a closed-loop rinse.



  1. Access the maintenance menu on the TFT or touch display and select "Milk System Clean."
  2. Add one dose of Jura Milk System Cleaner Mini-Tabs to the front compartment of the cleaning container.
  3. Fill the second compartment with fresh water to the indicated level mark.
  4. Connect the milk pipe from the dual spout to the container.
  5. Initiate the cycle. The machine will draw the solution through the frothing mechanism, utilizing steam and hot water to emulsify and flush out milk residues.
  6. When prompted, rinse the container and refill it with fresh water for the final rinse phase.

Warning: Never use generic dish soap or vinegar in the milk system. Dish soap creates excessive foam that can back-pressure into the air intake, while vinegar can perish the delicate silicone seals within the frother.



Step 2: The 3-Phase Brewing Unit Cleaning

Jura machines prompt for a "Clean" cycle approximately every 180 preparations or 80 switch-on rinses. This cycle targets the coffee oils (lipids) that accumulate on the stainless steel sieve and the brewing piston.



  1. When the "Clean" message appears, navigate to the maintenance section and start the program.
  2. Empty the drip tray and coffee grounds container. Reinsert them to signal the machine that the circuit is ready.
  3. The machine will perform an initial internal rinse. After several minutes, it will prompt you to "Add Tablet."
  4. Drop one Jura 3-Phase tablet into the bypass funnel (the chute used for pre-ground coffee).
  5. Close the lid and press "Next." The machine will now cycle water through the tablet at varying temperatures.

    • Phase 1 (Cleaning): Removes coffee residue and oils at 80°C.
    • Phase 2 (Rinsing): Flushes the brewing unit thoroughly.
    • Phase 3 (Protection): Applies a sealant to the internal surfaces to prevent future buildup.
  6. Once complete, empty the drip tray again to clear the discharged wastewater.

Pro-Tip: If you notice your coffee tastes bitter or the flow rate has slowed, do not wait for the prompt. Manually trigger the "Clean" cycle in the settings to clear any premature buildup in the dispensing spouts.



Step 3: Descaling and Hydraulic Decalcification

If you use the CLARIS Smart filter and replace it as prompted, your Jura machine should technically never require descaling. However, if the water hardness was not set correctly or the filter was bypassed, calcification will occur within the thermoblock.



  1. If the "Descale" prompt appears, remove the CLARIS filter from the water tank immediately. You cannot descale with the filter in place as the chemicals will ruin the ion-exchange resin.
  2. Dissolve three Jura descaling tablets in 500ml (approx. 17 oz) of lukewarm water in a separate container, then pour this into the empty water tank.
  3. Start the descaling program and follow the screen prompts to empty the trays.
  4. The machine will pump the descaling solution through the internal heating elements in intervals. This process is slow because the acid needs time to chemically break down the calcium carbonate.
  5. When prompted, rinse the water tank thoroughly, fill it with fresh cold water, and reinsert it to perform the final rinse of the hydraulic system.


Step 4: Maintenance of the Water Tank and External Surfaces

The water tank can develop a "biofilm" or slime if water is left stagnant. Once a week, the tank should be cleaned with a soft brush and mild detergent. Furthermore, for machines with the Intelligent Water System (I.W.S.), ensure the sensor area at the bottom of the tank is free of scale so it can properly read the RFID chip on the filter. Use a damp microfiber cloth for the exterior. For models with a "Chrome" or "Carbon" finish, avoid any abrasive pads which will permanently scratch the high-gloss lacquer.


Snapklik.com : Roobi Compatible Cleaning Tablets For Jura. 24 Jura ...

Snapklik.com : Roobi Compatible Cleaning Tablets For Jura. 24 Jura ...

Jura Technical Specifications and Maintenance Intervals

The following table outlines the technical requirements for maintaining peak performance across the most common Jura product lines.



Maintenance Task Frequency / Trigger Chemical Required Purpose
Milk System Clean Daily (after milk use) Jura Mini-Tabs Removes proteins and fats; prevents bacterial growth.
System Clean Every 180 cups 3-Phase Tablets Degreases the brewing unit and seals internal piping.
Filter Change Approx. every 50 liters CLARIS Smart / Smart+ Removes chlorine and prevents scale via ion exchange.
Descaling Only if prompted Descaling Tablets Removes calcium deposits from the thermoblock.
Drip Tray Rinse Daily Warm Water Prevents mold in the wastewater and grounds area.
Grinder Adjustment As needed N/A Calibrates extraction; only adjust while the grinder is running.

Troubleshooting Common Maintenance Failures

Despite the automated nature of Jura machines, certain mechanical or electronic errors can occur during or after the cleaning process.



Scenario 1: The "Clean" message persists after a full cycle



  • Root Cause: The cycle was interrupted by a power flicker, or the drip tray was removed and reinserted too quickly, failing to reset the internal counter.
  • Actionable Fix: Perform a "Dry Run." Start the cleaning cycle again, but do not use a second tablet if the first one was already consumed. Ensure you allow the machine to finish the entire countdown without removing the tray until explicitly prompted.


Scenario 2: Milk is "spitting" or not frothing despite cleaning



  • Root Cause: Dried milk protein has clogged the air intake (venturi) nozzle within the dual spout. The automated cleaning can sometimes fail to reach deep, hardened blockages.
  • Actionable Fix: Manually disassemble the frother. Remove the dual spout casing and take out the rubber frother components. Soak them in a solution of Jura Milk System Cleaner and warm water for 20 minutes, then use a thin needle or a specialized Jura cleaning brush to clear the tiny air hole.


Scenario 3: "Fill Water Tank" message with a full tank



  • Root Cause: The magnetic float in the water tank is stuck due to scale, or the machine cannot detect the CLARIS filter RFID chip.
  • Actionable Fix: Descale the water tank specifically. Fill the tank with a heavy concentration of descaling solution and let it sit for an hour to loosen the magnetic float. If using a filter, ensure it is seated firmly in the bracket so the RFID sensor can make a connection.


Scenario 4: Error 8 (Brewing Unit Malfunction)



  • Root Cause: The brewing unit is too stiff to move, often caused by a lack of regular cleaning cycles which allows coffee oils to act like "glue" on the gaskets.
  • Actionable Fix: Try running a cleaning cycle with a 3-phase tablet to see if the lubricants in the tablet can loosen the mechanism. If the error persists, the machine requires professional service to replace the "O-rings" and re-grease the drive motor.

Frequently Asked Questions



Can I use vinegar to descale my Jura machine?

No, using vinegar is strictly prohibited for Jura appliances. The acetic acid in vinegar is too aggressive for the internal gaskets and can leave a residual taste that is nearly impossible to flush out. Furthermore, vinegar is not effective at removing the specific type of mineral scale found in high-pressure thermoblocks, potentially leading to a complete heater failure.



Why does my Jura insist on a filter change so frequently?

The CLARIS Smart filter frequency is determined by the water hardness level you programmed during the initial setup. If your water is "Very Hard," the ion-exchange resin in the filter exhausts faster. To optimize this, test your water with a professional hardness strip and ensure the machine’s digital setting matches the actual grains per gallon of your supply.



Is it necessary to use the Jura branded cleaning tablets?

While third-party tablets exist, they often lack the "Third Phase" protective sealant found in genuine Jura tablets. Jura’s 3-Phase tablets are specifically formulated to melt at the exact temperature the machine uses during its rinse cycle. Generic tablets may not dissolve fully or may be too acidic, which can lead to premature wear of the brewing unit's seals.



How do I clean the grinder in a Jura machine?

Jura grinders are generally self-cleaning for dry coffee residues. However, if you use "oily" or dark-roasted beans, the oils can gum up the burrs. Never put water or liquid cleaner into the grinder. Instead, use a vacuum to suck out old beans and debris from the hopper, or use a specialized grinder cleaning product (like Urnex Grindz) that consists of food-safe tablets which are ground through the machine like coffee.

Professional Jura Service Support

Maintain your investment by following these laboratory-tested maintenance protocols to ensure every cup of espresso meets the Gold Cup Standard. For technical repairs beyond routine cleaning, always consult a certified Jura service center to preserve your warranty and machine integrity.


Snapklik.com : Roobi Compatible Milk System Cleaning Powder For Jura ...

Snapklik.com : Roobi Compatible Milk System Cleaning Powder For Jura ...

Read also: A recent augusta obituary contained a surprising final message