How To Change SolidWorks Units: The Complete Professional Guide
Changing units in SolidWorks requires understanding the difference between active document modifications and global template adjustments to prevent costly downstream manufacturing errors. This guide details the exact procedures for altering unit systems, customizing precision parameters, and locking down company-wide drafting standards.
Pre-Procedure Planning for CAD Environment Standardization
Before modifying dimensional parameters within a parametric CAD system, designers must establish whether the change applies only to the current working model or to all future iterations. Modifying units mid-project can introduce geometric scaling anomalies, corrupt mating relations in complex assemblies, and disrupt manufacturing tolerances if down-stream computer-aided manufacturing (CAM) software is not synchronized.
- Essential Gear and Software: SolidWorks 2020 through 2024 (Standard, Professional, or Premium), an active part, assembly, or drawing file, and administrative access to file locations for template updates.
- Mandatory Prerequisite Knowledge: Familiarity with system options versus document properties, an understanding of ANSI, ISO, DIN, or JIS drafting standards, and baseline knowledge of significant digits and decimal round-off rules.
- Estimated Duration and Scope: 5 minutes for single-file adjustments; 15 minutes for enterprise-wide template reconfiguration.
Step-by-Step Procedure for Modifying SolidWorks Units
Step 1: Accessing the Document Properties Menu
To alter the measurement system for the file currently open on your screen, navigate to the standard top menu bar. Click on the gear icon labeled Options, or drop down the Tools menu and select Options. In the resulting dialog box, switch from the System Options tab to the Document Properties tab. Under this tab, locate and click on the Units sub-category to open the primary measurement control panel.
Warning: Modifying settings under System Options alters application-wide behaviors, whereas modifying settings under Document Properties affects only the active part, assembly, or drawing file. Always verify which tab is selected before committing changes.
Step 2: Selecting the Predefined Unit System
Within the Units panel, SolidWorks provides a structured group of radio buttons representing standard measurement frameworks. Review the available options and select your required system: IPS (inch, pound, second), MMGS (millimeter, gram, second), CGS (centimeter, gram, second), or MKS (meter, kilogram, second). Alternatively, select Custom to build a hybrid measurement environment tailored to specific industry requirements.
Pro-Tip: If your company adheres to strict defense or aerospace standards, select Custom to lock down specific dual-dimensioning properties rather than relying on default presets.
Step 3: Configuring Unit Precision and Decimal Places
After selecting the base measurement system, fine-tune the display parameters for individual units within the lower grid of the Units dialog box. Locate the Length row and use the drop-down menu in the Decimal Places column to specify your required level of accuracy, ranging from whole numbers up to eight decimal places. Repeat this process for Angle, Mass/Section Properties, and Time parameters depending on whether your model requires structural FEA or motion analysis.
Step 4: Updating Mass Properties and Tolerances
Precision settings directly influence mass property calculations, center of gravity readouts, and volumetric outputs. Ensure that the Display scale for mass properties is set to match your chosen manufacturing density tables. Adjust the fractional display options if your drafting practices require architectural fractions rather than standard decimal formatting. Once all parameters are verified, click the OK button in the bottom right corner of the dialog box to apply the changes immediately to the active workspace.
Step 5: Saving Changes to Enterprise Templates
To prevent the need for manual unit conversions on every new project, you must save your newly configured environment as a master template. Navigate to File, select Save As, and choose Part Templates (*.prt; *.sldprt) from the file type drop-down menu. Save this file directly into your company designated template directory, then repeat the process for assembly and drawing formats to maintain total workflow consistency.
Change Dimension Settings Solidworks at Tayla Currey blog
SolidWorks Unit Systems and Engineering Standards Comparison
| Unit System | Base Length Unit | Base Mass Unit | Base Time Unit | Primary Engineering Application |
|---|---|---|---|---|
| MMGS | Millimeter (mm) | Gram (g) | Second (s) | Global ISO manufacturing, consumer products, automotive |
| IPS | Inch (in) | Pound (lbm) | Second (s) | US Customary aerospace, legacy defense, heavy machinery |
| CGS | Centimeter (cm) | Gram (g) | Second (s) | Academic physics, specialized scientific instrumentation |
| MKS | Meter (m) | Kilogram (kg) | Second (s) | Large-scale civil engineering, structural architecture |
Common SolidWorks Unit Failures and Field Fixes
Symptom: Dimensions update numerically, but physical geometry fails to resize, resulting in massive scaling errors.
- Root Cause: The user manually typed new dimension values without changing the underlying document unit system, or imported a neutral file format (STEP, IGES) with mismatched unit definitions.
- Actionable Fix: Open the imported file, navigate to Document Properties, switch the base unit system to match the native design intent, and use the scale feature or re-import the file with proper unit translation flags enabled.
Symptom: Drawings display dimensions in millimeters, while the underlying part file operates in inches.
- Root Cause: The drawing document properties override the referenced model property settings, or the drafting standard was established using mismatched template defaults.
- Actionable Fix: Open the drawing template, go to Document Properties, select Units, and check the box labeled "Use model units for all dimensions added to drawing" to synchronize both environments.
Symptom: Mass property calculations return impossible values, such as a small plastic bracket weighing several tons.
- Root Cause: A mismatch between the selected unit system (e.g., MMGS) and the material density definition, where grams were processed as kilograms or cubic meters were substituted for cubic millimeters.
- Actionable Fix: Re-apply the specific material from the SolidWorks Material database rather than using custom generic settings, and verify that the unit precision grid matches the density units of the chosen alloy or polymer.
Frequently Asked Questions
How do I change the units quickly without opening the options menu?
You can instantly change your active document units by looking at the status bar located in the bottom right corner of the SolidWorks interface. Click directly on the active unit text display, such as MMGS or IPS, to open a quick-selection flyout menu and choose an alternative system instantly.
Why do my drawing dimensions not match my part units?
Drawings operate independently from part and assembly files by default and maintain their own document properties. To fix this, access the drawing options, navigate to Document Properties, and ensure that the setting to inherit model units is explicitly enabled.
How do I set my custom units as the permanent default for all new parts?
After configuring your preferred units, drafting standards, and document properties, save the file as a template via File, Save As, and choose the appropriate part template file type. Next, go to System Options, File Locations, and point your Default Templates directory to the folder containing your newly saved custom file.
Can I display dual dimensions (both inches and millimeters) simultaneously?
Yes, SolidWorks supports dual dimensioning for international manufacturing requirements. Navigate to Document Properties, select Dimensions, and check the option to display dual dimensions, which automatically appends secondary bracketed measurements to all placed drawing annotations.
What happens to existing mates and simulations when units are changed?
Changing the unit system scales the internal mathematical representation proportionally, meaning existing geometric mates and simulation constraints will adapt without breaking. However, you should always re-run finite element analysis (FEA) studies and check interference detection to account for any rounding discrepancies introduced by the conversion.
Optimize Your CAD Workflow Today
Mastering unit management in SolidWorks eliminates costly manufacturing discrepancies and ensures seamless collaboration across international engineering teams. Implement these standardized template configurations today to streamline your design pipeline and maximize overall productivity.