How To Change Measurement Units In SolidWorks

How To Change Measurement Units In SolidWorks

Change Of Units at Latonya Rodriguez blog

Changing measurement units in SolidWorks requires updating the active document properties for parts, assemblies, and drawings, or modifying your default templates to ensure compliance with ASME, ISO, or DIN standards. This guide details how to adjust units via the Status Bar, Document Properties menu, and system-wide file locations to maintain precision across engineering workflows.


Understanding SolidWorks Unit Frameworks and Standards

Before modifying measurement units, you must understand how SolidWorks handles dimensional parameters across different file types (.sldprt, .sldasm, .slddrw). SolidWorks operates on a dual-layer unit structure: document-specific units that govern the active file and system-wide options that dictate default behaviors for newly created files. Failing to configure these settings correctly can lead to tolerance stack-up errors, manufacturing discrepancies, and non-compliance with geometric dimensioning and tolerancing (GD&T) standards.



  • Essential gear/tools/materials: SolidWorks 2020 or newer, active CAD part/assembly/drawing files, administrative access to template directories.
  • Mandatory prerequisite knowledge/standards: Familiarity with SI (Metric) and IPS (Inch, Pound, Second) systems, decimal place precision rules, and drawing template hierarchy.
  • Estimated budget/duration benchmarks: Zero monetary cost; workflow execution takes between 2 to 5 minutes depending on template updates.

Step-by-Step Guide to Modifying Units in Active Documents



Step 1: Accessing the Status Bar Unit Switcher

The fastest method to alter units for an active document is through the Status Bar located at the bottom right-hand corner of the SolidWorks graphical user interface. Locate the current unit display—which typically reads MMGS (Millimeter, Gram, Second), IPS, or CGS—and left-click directly on the text to open the quick-selection popup menu.

Pro-Tip: If you need custom decimal places or specific rounding rules that are not visible in the quick-selection menu, select "Edit Document Units" from the bottom of this popup to open the comprehensive property manager.



Step 2: Configuring Advanced Document Properties

To execute precise modifications regarding unit types, decimal display, and fractional limits, open the main properties menu by navigating to the top menu bar, selecting Tools, and then clicking Options. Within the System Options tab, switch to the Document Properties tab at the top of the dialog box, and click on the Units category from the left-hand navigation tree.

Within this menu, choose your desired unit system from the predefined options: IPS, CGS, MMGS, or MKS. Alternatively, select Custom to manually define individual parameters such as length, angle, mass, and time. Adjust the "Unit precision" dropdown menu for each parameter to set the exact number of decimal places (ranging from 0 to 8) required for your manufacturing tolerances.



Step 3: Updating Drawing Dimensions and Drafting Standards

When changing units in a SolidWorks drawing, existing dimensions do not automatically convert their text format unless explicitly updated, though their underlying numerical values scale to reflect the new unit system. Navigate to Document Properties, select Drafting Standard, and ensure your overall standard is set correctly to ANSI, ISO, DIN, JIS, BS, GOST, or GB.

Next, click on Dimensions within the Document Properties tree to set the primary and dual units display. If your manufacturing environment requires both metric and imperial measurements on the shop floor, check the box for "Dual units display" to automatically append secondary bracketed dimensions to all active drawing views.



Step 4: Saving Changes as Default Templates for Future Projects

To prevent the need to manually change units every time you open a new file, save your configured document properties as a reusable template. Navigate to File, select Save As, and choose Part Templates (.prtdot), Assembly Templates (.asmdot), or Drawing Templates (*.drwdot) from the "Save as type" dropdown menu.

Warning: Saving templates directly into the default SolidWorks installation directory may require Windows administrator privileges. It is best practice to save custom templates in a dedicated enterprise folder and link it via Tools > Options > System Options > File Locations > Document Templates.


how to change units in solidworks? | GrabCAD Questions

how to change units in solidworks? | GrabCAD Questions

Comparison of SolidWorks Unit Systems and Precision Limits



Unit System Base Length Base Mass Base Time Common Application Default Precision Range
IPS Inch (in) Pound (lb) Second (s) US Aerospace & Automotive 0.12 to 0.0001 in
MMGS Millimeter (mm) Gram (g) Second (s) Global ISO Mechanical Design 0.1 to 0.000 mm
CGS Centimeter (cm) Gram (g) Second (s) Scientific & Physics Modeling 0.1 to 0.0000 cm
MKS Meter (m) Kilogram (kg) Second (s) Large-Scale Civil Engineering 0.01 to 0.00000 m

Troubleshooting Common Unit Conversion Issues



  • Symptom: Existing model dimensions scale incorrectly or appear astronomically large after switching units from millimeters to inches.

    • Root Cause: Changing the unit system via the Document Properties menu scales the underlying geometry mathematically rather than converting the nominal value (e.g., converting a 100mm cube directly to 100in instead of scaling it to 3.937in).
    • Actionable Fix: Use the Scale feature (Insert > Features > Scale) with the scale factor set to the exact conversion ratio (0.0393701 for mm to inches) before changing the document unit system, or use the Status Bar switcher which performs the proper conversion automatically.
  • Symptom: New part files created from company templates revert back to old metric units despite recent changes.

    • Root Cause: SolidWorks is referencing an outdated default template path in the system options rather than the newly modified template file.
    • Actionable Fix: Update the file paths under Tools > Options > System Options > File Locations to point directly to your customized template directory, or overwrite the existing default template files with your updated configurations.
  • Symptom: Drawing dimensions display dual units when only a single unit system is required for production.

    • Root Cause: The "Dual units display" checkbox remains active within the Document Properties > Dimensions menu for the specific drawing sheet format.
    • Actionable Fix: Open the drawing template, navigate to Document Properties > Dimensions, uncheck the dual units option, and re-save the template file.

Frequently Asked Questions



How do I change units for a single dimension without changing the whole part?

You can override individual dimensions by clicking on the dimension in the graphics area to open the PropertyManager on the left side of the screen. Under the Dimension Text section, clear the automatic nominal text box and manually type your desired value, or adjust the units specifically for that annotation without affecting the global document properties.



Why do my mass properties calculations show incorrect units?

Mass properties depend entirely on both the unit system and the assigned material density. Verify that your document units are set correctly and that a proper material (such as Alloy Steel 1020 or 6061-T6 Aluminum) is applied to the FeatureManager design tree, as missing material properties default to a density of zero or standard water density.



Can I set different units for parts and assemblies independently?

Yes, SolidWorks assemblies (.sldasm) maintain their own independent unit settings separate from the individual component parts (.sldprt) inserted into them. Changing the unit system of an assembly modifies the assembly-level measurements and mating tolerances, but it does not alter the native unit definitions of the constituent part files.



How do I convert legacy drawings without redrawing the geometry?

Open the legacy drawing, navigate to Tools > Options > Document Properties > Units, and select the correct target unit system while ensuring standard drafting options are preserved. If the drawing scale appears distorted, right-click the sheet properties and adjust the sheet scale ratio to match the newly converted dimensional parameters.

Mastering your CAD environment's dimensional settings ensures flawless collaboration and error-free manufacturing handoffs. Optimize your design workflow today by standardizing your SolidWorks templates and adopting enterprise-wide unit protocols.


How To Measure Countersink Angle In Solidworks at Steve Stults blog

How To Measure Countersink Angle In Solidworks at Steve Stults blog

Read also: Trackitt 485 Tracker