How To Call France From USA: The Definitive International Dialing Guide

How To Call France From USA: The Definitive International Dialing Guide

3 Ways to Call the United States From France - wikiHow

To place a phone call to France from the United States, dial the US international exit code 011 (or tap + on a mobile device), followed by the France country code 33, and then the 9-digit national subscriber number, omitting the leading domestic zero. For example, to call a Paris landline from a US phone, the complete dialing sequence is 011 33 1 XX XX XX XX.


Technical Checklist & Pre-Dialing Considerations

Placing an international call over the Public Switched Telephone Network (PSTN) requires proper signaling and routing protocols. Before entering the dial string, you must verify your carrier configuration, understand the target destination type (landline versus mobile), and calculate the time zone offset to prevent calling during non-business or sleeping hours.



Necessary Equipment, Network Access, and Routing Standards



  • Active International Outbound Provisioning: Ensure your US landline or wireless carrier (such as AT&T, Verizon, or T-Mobile) has international outbound dialing active on your account. Many US carriers restrict international calling by default to prevent fraudulent charges.
  • SIP/VoIP Configuration (if applicable): If dialing via an enterprise Voice over Internet Protocol (VoIP) system, verify your Session Initiation Protocol (SIP) trunk allows international media streams and conforms to standard E.164 numbering formats.
  • Time Zone Calculation: France operates on Central European Time (CET, UTC+1) or Central European Summer Time (CEST, UTC+2) during daylight saving periods. The contiguous United States spans four primary time zones (Eastern, Central, Mountain, and Pacific), representing a time difference of 6 to 9 hours behind France. Ensure you cross-reference the local time in Paris before executing your call.
  • Billing and Rates Verification: Standard international direct dialing (IDD) rates apply unless you have an active international calling plan. Rates can range from $0.05 to over $3.00 per minute depending on whether the target terminal is a landline or a mobile phone.

Technical Steps to Dial France from the United States

To successfully route your call through international gateways, you must construct a precise sequence of digits. This procedure bypasses domestic switches, directs the signal through transatlantic marine cables or satellite links, and matches the French domestic routing system.



Step 1: Input the US International Access Code (Exit Code)

The exit code, or International Direct Dialing (IDD) prefix, signals your local carrier to route the outgoing call outside the North American Numbering Plan (NANP).



  • From a Landline: Dial 011. This is the standard physical exit code for North America.
  • From a Mobile Device / Smartphone: Press and hold the 0 key until the plus sign (+) appears on the screen. The "+" symbol serves as a universal exit code, dynamically recognized by global cellular networks to automate the necessary outbound routing prefix regardless of the country you are calling from.


Step 2: Enter the France Country Code

The International Telecommunication Union (ITU) assigns specific country codes under the E.164 standard.



  • Dial 33. This digit combination routes the call directly to the French national telecommunications infrastructure.


Step 3: Strip the French National Trunk Prefix

French domestic phone numbers consist of 10 digits, beginning with a leading 0. This initial "0" is a domestic trunk prefix used solely for routing calls originating within France.



  • Crucial Rule: When calling from the United States, you must drop the leading 0.
  • If the domestic number is written as 01 42 27 78 29, you must omit the first digit, leaving 1 42 27 78 29. Failing to remove this prefix will cause the international switchboards to reject the call as an invalid number format.


Step 4: Dial the National Significant Number

Input the remaining 9 digits of the phone number. This sequence contains the regional area code (or mobile network designation) and the subscriber’s unique line number.



  • Landline Example (Paris): To dial the domestic number 01 40 20 50 50 from a US landline, enter: 011 33 1 40 20 50 50.
  • Mobile Phone Example: To dial the domestic mobile number 06 12 34 56 78 from a US mobile phone, enter: +33 6 12 34 56 78.

How to Call France Country Code from the US | The DialLink Blog

How to Call France Country Code from the US | The DialLink Blog

France Numbering Plan & Regional Code Architecture

The French telecommunications infrastructure is organized into five geographic zones, along with designated prefixes for mobile networks and non-geographic IP-based lines. The table below details the routing codes and structural formats required when calling different regions and services in France from the United States.



Destination Region / Service Domestic Prefix US-to-France Dial Sequence (Landline / PSTN) US-to-France Dial Sequence (Mobile / VoIP) Target Line Type
Zone 1: Paris & Île-de-France 01 011 33 1 [8 Digits] +33 1 [8 Digits] Geographic Landline
Zone 2: Northwest France 02 011 33 2 [8 Digits] +33 2 [8 Digits] Geographic Landline
Zone 3: Northeast France 03 011 33 3 [8 Digits] +33 3 [8 Digits] Geographic Landline
Zone 4: Southeast France & Corsica 04 011 33 4 [8 Digits] +33 4 [8 Digits] Geographic Landline
Zone 5: Southwest France 05 011 33 5 [8 Digits] +33 5 [8 Digits] Geographic Landline
Mobile Networks (All Carriers) 06 or 07 011 33 6 [8 Digits] or 011 33 7 [8 Digits] +33 6 [8 Digits] or +33 7 [8 Digits] Cellular Device
Non-Geographic VoIP / IP Lines 09 011 33 9 [8 Digits] +33 9 [8 Digits] Internet-Based / Triple-Play Lines

International Dialing Failures & Troubleshooting Solutions

International calls can fail due to several technical, administrative, or operational errors. Below are the most frequent root causes and the specific procedures to resolve them.



  • Error: Constant Busy Signal or Immediate Disconnect



    • Root Cause: The domestic trunk prefix "0" was left in the dialed string, or the destination phone number is missing a digit.
    • Actionable Fix: Reconstruct the dialing string. Confirm that the total number of digits after the country code "33" is exactly nine. Verify that you have completely omitted the leading "0".
  • Error: Fast Busy Signal or Operator Intercept Message ("Your call cannot be completed as dialed")



    • Root Cause: Your US telephone service provider has an active international dialing block on your account, preventing outbound international traffic.
    • Actionable Fix: Contact your domestic carrier's customer service or enterprise administrator to verify that "International Direct Distance Dialing" (IDDD) is explicitly enabled on your subscription. If you are using a prepaid SIM card, confirm you have sufficient international balance.
  • Error: "The number you are calling is not recognized"



    • Root Cause: You are trying to dial a special premium-rate service (starting with domestic prefix 08) or a restricted toll-free number that does not accept international inbound routing.
    • Actionable Fix: Premium numbers (such as some 0899 numbers) are often blocked for security and fraud prevention by international gateway switches. Search the target company's website for an alternative standard geographic number (starting with 01, 02, 03, 04, or 05) or an email address to request a direct callback.
  • Error: VoIP Call Fails to Connect or Drops Instantly



    • Root Cause: The local router or hardware firewall has SIP Application Layer Gateway (SIP ALG) enabled, which alters packet headers and disrupts the signaling process between your VoIP phone and the international gateway.
    • Actionable Fix: Log into your local router's administrative dashboard, locate the WAN or Firewall settings, disable the SIP ALG feature, and reboot your VoIP hardware. Ensure your VoIP client is formatting outbound numbers strictly in the full E.164 format: +33 followed by the 9-digit subscriber number.

Frequently Asked Questions



How much does it cost to call France from the United States?

Standard cellular and landline rates for international direct dialing without an active global calling plan can cost between $1.00 and $3.50 per minute. To reduce these expenses, contact your telecommunications carrier to activate an international calling add-on, or utilize software-based VoIP applications to communicate over an internet connection.



How do I call a French mobile phone from a US smartphone?

To call a French mobile phone, press and hold the "0" key on your smartphone's dial pad to input the "+" symbol. Next, type the France country code "33", followed by the French mobile prefix (omitting the leading zero—so dial "6" or "7" instead of "06" or "07"), and then input the remaining 8 digits of the mobile subscriber number. The complete dial string will look like this: +33 6 XX XX XX XX.



Can I dial French toll-free numbers from the United States?

Many French toll-free numbers (commonly starting with the domestic prefix 0800 or 0805) are geographically restricted by their hosting networks to accept incoming calls only from within France. If your call will not go through, you must contact the business via email or locate their standard geographic ten-digit landline number designed for international inquiries.



Do French overseas departments and territories use the same country code?

French overseas departments and territories (such as Guadeloupe, Martinique, Reunion, and French Guiana) do not use the country code "+33". They are assigned unique country codes by the ITU. For example, to call Guadeloupe, use country code 590; for Martinique, use 596; and for Reunion, use 262. Ensure you verify the exact territory code before dialing.



Why is my call to a French landline failing during the day?

Verify the exact time difference between your location in the US and the destination in France. France observes Central European Time (CET), which is six hours ahead of Eastern Standard Time (EST) and nine hours ahead of Pacific Standard Time (PST). If you call during the US business day, it may already be late in the evening or night in France, resulting in unanswered calls or automated voicemail interceptions.

Optimize Your Global Communication Systems

If your organization requires reliable, low-latency telecommunications with European partners, standard telephone lines can quickly become a significant expense. Implement an enterprise-grade cloud VoIP system to secure clear, cost-effective international voice networks for your business.


How Do You Dial The Us From France | Detroit Chinatown

How Do You Dial The Us From France | Detroit Chinatown

Read also: Mobile homes to rent are becoming the top choice for families