Master The Back Post Double Crochet: A Technical Guide To Textured Stitchwork

Master The Back Post Double Crochet: A Technical Guide To Textured Stitchwork

How To Work A Front Post Or Back Post Double Crochet Stitch ...

The back post double crochet (BPDC) is a specialized textural technique where the stitch is anchored around the vertical body or "post" of a previous row's stitch rather than through the traditional top loops. This mechanical shift displaces the top of the stitch toward the back of the work, creating a prominent horizontal ridge on the front surface and providing the structural foundation for ribbing, cables, and complex 3D relief patterns.


Essential Materials and Foundation Mastery for Post Stitches

Success in executing the back post double crochet depends heavily on the interaction between fiber elasticity and hook ergonomics. Unlike standard flat stitches, post stitches place higher lateral stress on the yarn, meaning your choice of materials directly impacts the clarity of the resulting texture. A yarn with high stitch definition, such as a multi-ply wool or a mercerized cotton, is recommended for beginners to clearly identify the "post" or vertical pillar of each stitch.



  • Essential Gear and Tools:

    • Ergonomic Crochet Hook: Size appropriate for yarn weight (standard G/4.0mm to H/5.0mm for Worsted/Weight 4).
    • High-Definition Yarn: Smooth, non-splitting fibers in light colors (avoid boucle, chenille, or dark yarns which obscure stitch anatomy).
    • Locking Stitch Markers: Critical for identifying the first and last stitches of a row to prevent accidental tapering.
    • Blunt-End Tapery Needle: For weaving in ends without piercing the structural posts.
  • Mandatory Prerequisite Knowledge:

    • Standard US Double Crochet (DC) mechanics (Yarn over, pull up loop, pull through two, pull through two).
    • Stitch Anatomy: Differentiating between the "V" at the top of the stitch and the "Post" (the vertical stem).
    • Tension Management: Understanding how "loop height" affects fabric drape.
  • Benchmarks:

    • Estimated Learning Duration: 20–40 minutes for mechanical proficiency; 2 hours for rhythmic consistency.
    • Project Scope: Ideal for hats, sweater cuffs, blankets, and structural home decor.

Mastering the BPDC Technique: A Sequential Technical Workflow

Executing the back post double crochet requires a departure from the standard front-facing approach. You will be working primarily from the rear of the fabric. The goal is to wrap your hook around the vertical stem of the stitch from the previous row, moving from the back, across the front of the post, and back to the rear.



Step 1: Preparation and Initial Yarn Over

Before beginning the BPDC, you must have a foundation row of standard double crochet or another stitch. This provides the vertical posts required for the technique. To start your BPDC row, chain 2 or 3 (depending on your personal tension) to serve as your turning chain. This chain does not typically count as a stitch when working post stitches to avoid large gaps at the edges. Yarn over (YO) your hook from back to front, maintaining a firm grip on the working yarn to prevent the loop from sliding down the shaft.

Pro-Tip: Keep your initial yarn over slightly looser than usual. Because post stitches are worked lower down the body of the stitch, they have a shorter "effective height" than standard stitches, which can lead to a tight, curled fabric if tension isn't managed.



Step 2: Posterior Hook Insertion

Rotate your work slightly so you can see the back (wrong side) of the fabric. Locate the post of the second stitch from the previous row (skipping the stitch directly under the turning chain). Insert your hook from the back of the fabric toward the front, passing through the space to the right of the post (for right-handed crocheters). Then, move the hook across the front of the post and push the hook tip back through to the rear of the fabric on the left side of the post.

Warning: Ensure your hook passes entirely around the vertical pillar. If you accidentally catch only a portion of the fiber or include the top "V" loops in your hook movement, the structural integrity of the ridge will be compromised, and the pattern will appear distorted.



Step 3: Drawing Up the Interstitial Loop

With your hook now positioned behind the post and the hook tip on the "wrong side" of the work, yarn over again. Gently pull the yarn through the space around the post. You must pull this loop up to the height of your current row. You should now have three loops on your crochet hook.



Step 4: Completing the Double Crochet Sequence

Finish the stitch as you would a standard double crochet. Yarn over and pull through the first two loops on your hook. You will have two loops remaining. Yarn over once more and pull through the final two loops. The stitch is now complete. You will notice that the top "V" of the stitch from the previous row has been pushed forward, creating a horizontal bar on the front of your work.



Step 5: Maintaining Row Continuity

Repeat the process across the row. When working a series of BPDC stitches, the fabric will naturally begin to recede. To maintain a straight edge, the final stitch of the row is often worked as a standard double crochet into the top of the turning chain rather than a post stitch. This provides a stable "anchor" for the fabric.


Back Post Double Crochet · How To Double Crochet · Yarncraft on Cut Out ...

Back Post Double Crochet · How To Double Crochet · Yarncraft on Cut Out ...

Comparative Analysis of Post Stitch Dynamics and Material Requirements

Post stitches differ significantly from standard stitches in terms of physics and material consumption. Because the stitch is wrapped around the body of the previous row, the fabric becomes thicker and more compressed. The following table outlines the technical variations between standard DC, Front Post DC (FPDC), and Back Post DC (BPDC).



Technical Parameter Standard Double Crochet (DC) Front Post Double Crochet (FPDC) Back Post Double Crochet (BPDC)
Insertion Point Top "V" loops (Front/Back) Around the post (Front-Back-Front) Around the post (Back-Front-Back)
Visual Result Flat, reversible surface Raised vertical ridge on the front Recessed front, horizontal ridge
Fabric Density Single layer (Baseline) High density (Approx. 1.5x thickness) High density (Approx. 1.5x thickness)
Yarn Consumption 100% (Baseline) 120% - 125% 120% - 125%
Vertical Compression Minimal Significant (Stitches are shorter) Significant (Stitches are shorter)
Elasticity Moderate High (Ideal for ribbing) High (Ideal for ribbing)
Primary Use Case General fabric construction Cables, basketweave, ribbing Ribbing, textures, shadow work

Remedying Common Structural Faults in Back Post Construction

Even experienced crocheters encounter issues with tension and placement when working BPDC. Identifying the root cause of these mechanical failures is essential for achieving a professional finish.



  • Excessive Gapping Between Stitches



    • Root Cause: This usually occurs when the "pull up" loop in Step 3 is elongated too much, or if the yarn over is too loose. It can also happen if you are working into the wrong space between posts.
    • Actionable Fix: Tighten your tension on the initial yarn over and ensure the hook is kept parallel to the floor when pulling the loop around the post. If gaps persist, drop down one hook size for the post-stitch sections of your pattern.
  • Fabric Curling or Distortion



    • Root Cause: Post stitches have less height than standard stitches because they overlap the row below. If you use the same tension as a standard DC, the fabric will pull inward and curl.
    • Actionable Fix: Consciously "lift" the first loop pulled through in Step 3 to ensure the stitch reaches the full height of the row. Alternatively, use a hook 0.5mm larger than recommended for the yarn to allow for the extra "wrap" distance around the post.
  • Misaligned Ridges in Ribbing



    • Root Cause: This is often caused by failing to distinguish between the BPDC and FPDC when turning the work. A BPDC on the "Right Side" becomes an FPDC when viewed from the "Wrong Side."
    • Actionable Fix: Always look at the "face" of the stitch. If the post is protruding toward you, work a Front Post stitch to maintain the ridge. If the post is recessed away from you, work a Back Post stitch. Use stitch markers to identify the "Right Side" (RS) of your fabric.
  • Difficulty Inserting the Hook



    • Root Cause: Using a hook with a blunt, rounded head or working with a yarn that has zero elasticity (like low-quality cotton).
    • Actionable Fix: Switch to an "inline" style hook (like Susan Bates) which has a more pointed head to navigate the tight spaces behind the posts. If using cotton, ensure you are not pulling the previous row's stitches too tight.

Frequently Asked Questions



What is the difference between US and UK terms for back post double crochet?

In US terminology, the stitch is called the Back Post Double Crochet (BPDC). In UK/Australian terminology, the same movement is referred to as a Back Post Treble Crochet (BPTC). It is vital to check the origin of your pattern, as confusing these terms will result in stitches that are significantly too tall for the intended design.



Why does my BPDC row look shorter than my regular DC rows?

Because the BPDC wraps around the stem of the previous stitch rather than sitting on top of it, the rows physically overlap. This reduces the vertical height of each row by approximately 25-30%. When substituting post stitches into a pattern, you will likely need to work more rows to reach the same linear measurement as standard double crochet.



Can I work a back post stitch around any type of stitch?

Technically, yes. You can perform back post maneuvers around half-double crochets (BPHDC) or treble crochets (BPTR). However, the shorter the stitch being wrapped, the more difficult it is to insert the hook. Back post stitches are most effective when worked around taller stitches (DC and up) because they provide a defined "post" to grab.



How do I count rows when using back post double crochet?

Counting can be tricky because of the overlapping nature of the stitches. The best method is to count the horizontal ridges created on the front of the work. Each ridge represents one row of post-stitch processing. Alternatively, look at the edges of the work and count the turning chains.



Is the BPDC reversible?

The stitch itself is not reversible; it creates a distinct ridge on one side and a recessed area on the other. However, when combined with Front Post Double Crochet in an alternating sequence (FPDC, BPDC, FPDC), you can create "1x1 Ribbing" which is functionally and visually reversible, much like knitted ribbing.

Elevate Your Crochet Projects with Technical Precision

Mastering the back post double crochet allows you to transcend flat fabric and enter the realm of architectural crochet design. By integrating these textured techniques into your repertoire, you gain the ability to create sophisticated garments and heirlooms with professional-grade structural integrity.


How to Work a Front Post or Back Post Double Crochet Stitch, Crochet ...

How to Work a Front Post or Back Post Double Crochet Stitch, Crochet ...

Read also: Remembering the Life and Legacy of John Wendel Howarth