Master The Art: How To Add Stitches When Knitting Like A Pro

Master The Art: How To Add Stitches When Knitting Like A Pro

How to Add Stability to a Seamless Sweater | Sister Mountain

Adding stitches to your knitting project, known as increasing, allows you to shape garments, craft intricate lace patterns, and expand scarves smoothly. By mastering both raised and worked-from-existing increases, you can maintain fabric tension and edge symmetry across any weight of yarn.


Pre-Procedure Planning for Seamless Stitch Increases

Executing clean stitch increases requires more than just picking up needles and hoping for the best. Proper preparation ensures your gauge remains consistent, your edges look tailored, and your increases blend invisibly into the fabric or create decorative design elements. Whether you are shaping a sweater sleeve, expanding a shawl from a point, or creating bespoke curves, having the right toolkit and foundational knowledge dictates your success.



  • Essential Gear and Tools: A pair of straight or circular knitting needles matching your gauge, a crochet hook for dropped stitches, locking stitch markers to track shaping intervals, and a tapestry needle for weaving in ends.
  • Mandatory Prerequisite Knowledge: Proficiency in basic knit and purl stitches, familiarity with reading row-by-row pattern instructions, and the ability to identify the horizontal strand of yarn resting between two active stitches (the bar).
  • Benchmarks and Scope: Plan for an estimated 15 to 30 minutes of practice swatch time to determine which increase method best suits your yarn fiber memory and structural requirements.

Step-by-Step Increase Execution Workflow



Step 1: Choosing Your Increase Methodology

Before inserting your needle into the work, evaluate whether your project requires a leaning increase (such as for sweater raglan seams) or a vertical, non-leaning increase (such as for center-out shawls). Leaning increases tilt either to the right (RLI - Right Lifted Increase) or to the left (LLI - Left Lifted Increase), whereas increases like the Knit Front and Back (KFB) leave a visible bump resembling a purl stitch. Select your method based on the aesthetic demands of the design.

Pro-Tip: Always work your increase at least one stitch in from the edge if you plan to seam the pieces later, ensuring a clean mattress stitch seam line.



Step 2: Executing the Knit Front and Back (KFB)

The KFB is a classic, beginner-friendly increase that works well in garter stitch and rustic wool yarns. Insert your right-hand needle into the front of the next stitch on the left-hand needle as if to knit, wrap the yarn, and pull the loop through, but do not slide the original stitch off the left needle yet. Instead, swing your right-hand needle around and insert it into the back loop of that same stitch, wrap the yarn, and pull a second loop through. Now, slide the original stitch off the left needle, leaving two new stitches on your right needle.

Warning: Be careful not to pull the second leg of the KFB too tightly, or you will distort the neighboring stitches and create an uneven ladder effect.



Step 3: Working Invisible Lifted Increases (RLI and LLI)

For seamless garment shaping, lifted increases are the industry gold standard. To execute a Right Lifted Increase (RLI), use your right needle tip to pick up the right leg of the stitch directly below the next stitch on your left needle, placing it onto your left needle, then knit it through the back loop. To execute a Left Lifted Increase (LLI), use your left needle tip from front to back to pick up the left leg of the stitch two rows down (the stitch below the one just knitted on your right needle), and knit it through the front loop.



Step 4: Mastering the Make One (M1) Family

The Make One Left (M1L) and Make One Right (M1R) create an open, balanced loop increase frequently used in lace and top-down garments. To perform an M1L, insert your left-hand needle from front to back under the strand of yarn running between the stitch you just worked and the next stitch on the needle, then knit this strand through the back loop. To perform an M1R, insert your left-hand needle from back to front under that same strand, then knit it through the front loop.


Tip Tuesday: Adding Texture and Depth to Your Knitting with Cables ...

Tip Tuesday: Adding Texture and Depth to Your Knitting with Cables ...

Technical Specifications and Increase Method Comparison



Increase Method Lean Direction Visibility/Aesthetic Best Used For Fabric Impact
Knit Front and Back (KFB) Neutral Visible purl-like bump Garter stitch, cuffs, rustic wools Adds slight stiffness to the edge
Right Lifted Increase (RLI) Right-leaning Near invisible Raglan sweater lines, curved seams Maintains smooth fabric drape
Left Lifted Increase (LLI) Left-leaning Near invisible Raglan sweater lines, curved seams Maintains smooth fabric drape
Make One Left (M1L) Left-leaning Subtle mesh hole Lace panels, circular shawls Creates airy, decorative spacing
Make One Right (M1R) Right-leaning Subtle mesh hole Lace panels, circular shawls Creates airy, decorative spacing

Common Shaping Failures and Field Fixes

Even experienced knitters encounter tension issues and counting errors when adding stitches. Identifying the root cause of an irregular edge or a misplaced increase saves hours of frogging and rebuilding.



  • Root Cause: Visible holes appearing around the increase point in stockinette fabric.

    • Actionable Fix: You likely selected an open yarn-over instead of a closed make-one or lifted increase. Ensure you twist the strand of yarn when working M1 or lifted increases to close the gap.
  • Root Cause: Count is off by one stitch after working a KFB row.

    • Actionable Fix: The second leg of the KFB was accidentally dropped or worked as a standard stitch without wrapping the yarn properly. Inspect the column using a locking stitch marker and secure the split loop with a crochet hook.
  • Root Cause: Raglan shaping looks uneven and leans in the wrong direction.

    • Actionable Fix: Confused your RLI and LLI orientations. Always ensure your increases mirror each other on the left and right sides of the garment seam line.

Frequently Asked Questions



What is the easiest way to add stitches for a beginner?

The Knit Front and Back (KFB) is universally considered the best starting point for beginners because it relies entirely on basic knitting motions without requiring you to pick up floating strands between stitches. It leaves a decorative, visible bar that can double as a design feature in rustic garments.



How do I know whether to use a leaning or non-leaning increase?

Use leaning increases like RLI and LLI when shaping garments along a specific diagonal line, such as a raglan sweater, to ensure the stitches follow the anatomical curve of the body. Use non-leaning increases like KFB when working in garter stitch or when the visual placement of the increase matters less than the structural expansion.



Can I add stitches in the middle of a row?

Yes, you can add stitches anywhere in a row using Make One (M1) increases, backward loop casts, or KFB increases. This technique is essential for expanding the body of a shawl, creating thumb gussets in mittens, or shaping the bust darts in a custom-fitted sweater.



Why do my increases leave small holes in my knitting?

Holes typically occur if you accidentally perform a yarn-over instead of a twisted increase, or if you pull the working yarn too loosely between stitches. To eliminate holes, switch to a lifted increase or ensure your Make One (M1) stitch is twisted correctly on the working needle.

Elevate your fiber arts portfolio today by practicing these professional increase techniques on a dedicated test swatch before starting your next sweater or shawl project.


How to Add Length to a Knit Sweater - Knifty Knittings

How to Add Length to a Knit Sweater - Knifty Knittings

Read also: New barbershop tech will personalize haircuts for teens even further