How To Authenticate The 100 Dollar American Bill: Comprehensive Security And Verification Guide

How To Authenticate The 100 Dollar American Bill: Comprehensive Security And Verification Guide

Hundred Dollar Bills American United States Money Stock Photo - Image ...

Authenticating a 100 dollar American bill requires evaluating six core security features updated in the Series 2009 and 2009A redesigns by the Bureau of Engraving and Printing. Verification relies on tactile substrate examination, optical variable ink shifts, microprinting legibility under magnification, and ultraviolet fluorescence at 365 nanometers. Mastering these forensic identification steps allows cash handlers to instantly differentiate genuine Federal Reserve notes from sophisticated counterfeit currency.


Authentication Tooling and Verification Prerequisites

The 100 dollar bill is the highest denomination currently produced for general circulation by the United States Department of the Treasury's Bureau of Engraving and Printing (BEP). Because of its widespread global distribution and high face value, it remains the primary target for domestic and international counterfeiting syndicates. Establishing a standardized verification procedure requires understanding physical paper composition, specialized ink formulations, and optical security devices integrated directly into the note's structure.



Practical Inspection Checklist



  • Essential Physical Equipment:



    • Ultraviolet (UV) Light Source: Standardized 365 nm wavelength LED torch or desktop UV pass-through validator.
    • Optical Magnification: 10x to 20x LED illuminated jeweler’s loupe or portable digital microscope.
    • Transmitted Light Source: Standard light box, desk lamp, or natural daylight window for backlight testing.
    • Precision Measuring Tool: Digital micrometer or thickness gauge (standard currency thickness benchmark: 0.0043 inches or 0.1092 mm).
  • Mandatory Prerequisite Knowledge & Standards:



    • Substrate Composition: Genuine US currency paper consists of a precise 75% cotton and 25% linen fiber blend with red and blue security fibers embedded throughout the matrix.
    • Printing Method Identification: Distinction between recessed Intaglio printing (raised ink texture) and flat offset printing (common in counterfeit reproductions).
    • Federal Reserve System Indicators: Knowledge of the 12 Federal Reserve Banks, matching seal letters (A1 through L12), and series year positioning.
  • Operational Benchmarks:



    • Point-of-Sale Inspection Time: 5 to 10 seconds per note using manual visual/tactile protocols.
    • Forensic Lab Verification Time: 2 to 3 minutes for optical micro-analysis and UV/IR spectrum verification.
    • Equipment Budget Range: $15 for basic UV/magnifier pocket tools to $300+ for automated multi-spectrum desktop validators.

Step-by-Step Verification Protocol for the $100 Federal Reserve Note

Note: Ensure direct light and flat positioning before executing the following systematic inspection sequence on the Series 2009/2009A/2017A redesigns.



Step 1: Execute Tactile Substrate and Intaglio Relief Assessment

Begin authentication by feeling the paper texture and surface topography. Genuine United States currency paper is manufactured by Crane Currency and possesses a distinct crisp, dense texture without the slickness or wood-pulp brittleness of standard commercial papers.



  1. Pass your thumb firmly across the left shoulder of Benjamin Franklin’s portrait. You must feel distinct, rough ridges produced by heavy Intaglio steel-plate printing presses. Counterfeit notes produced via inkjet or laser printing are completely smooth.
  2. Grasp the edges of the note and apply light tension. Authentic paper yields a sharp, metallic "snap" when flicked, unlike wood-pulp paper which flexes silently or tears under minor strain.
  3. Examine the blank margins of the paper for embedded red and blue security threads. These are short synthetic fibers randomly distributed within the paper pulp during manufacturing. If these fibers appear printed strictly on the surface, reject the note.

Warning: Counterfeiters often coat fake notes with hairspray, clear matte wax, or texturing sprays to simulate Intaglio raised ink. Always pair tactile testing with optical feature inspection.



Step 2: Inspect the 3D Security Ribbon and Bell in the Inkwell

The most prominent anti-counterfeiting innovation on modern $100 bills (Series 2009 to present) is the blue 3D Security Ribbon woven directly through the paper substrate, combined with the color-shifting inkwell.



  1. Locate the wide blue ribbon running vertically to the right of the central portrait. Observe that the ribbon is woven into the paper paper matrix (visible as woven paper bands alternating over the ribbon), not glued onto the surface.
  2. Tilt the note back and forth vertically. Observe the small printed bells inside the blue ribbon move side-to-side (horizontally).
  3. Tilt the note side-to-side horizontally. Observe the bells move up and down (vertically). The movement pattern is orthogonal to the movement of the note.
  4. Examine the small copper-colored inkwell located to the left of the large numeral "100" on the lower right front side.
  5. Angle the bill toward a light source. Watch the copper bell inside the inkwell dynamically shift color from solid metallic copper to vibrant emerald green, making the bell appear to pop in and out of the copper inkwell.

Pro-Tip: The 3D Security Ribbon uses micro-mirrors to create dynamic optical motion. If the bells inside the ribbon do not shift directions opposing your tilt angle, or if the blue stripe can be peeled off with a thumbnail, the bill is counterfeit.



Step 3: Analyze Transmitted Light Features (Watermark and Security Thread)

Hold the note up against a strong light source (light box, ceiling fixture, or ambient daylight) to verify two internal structural features embedded deep inside the paper matrix.



  1. Portrait Watermark Check: Observe the faint, unprinted image space to the right of the main portrait. In transmitted light, a subtle, highly detailed portrait of Benjamin Franklin appears on both the front and back of the bill. It must blend smoothly into the surrounding paper without harsh dark lines or muddy shading.
  2. Embedded UV Thread Check: Look to the left of the main portrait for a thin, transparent polymer thread running vertically inside the paper. The thread is invisible under standard reflected light but fully legible when backlit.
  3. Thread Microprinting: Read the microscopic text printed along the internal polymer ribbon under backlight. It must spell out "USA" alternating with "100" in crisp capital lettering on both sides.


Step 4: Examine Microprinting under Optical Magnification

Using a 10x jeweler’s loupe or micro-lens, inspect three key regions containing high-resolution microprinting that exceeds the output limits of commercial optical printers.



  1. Jacket Collar: Inspect the neckband of Benjamin Franklin's coat where the collar touches his vest. Verify the micro-printed text reading "THE UNITED STATES OF AMERICA" along the border.
  2. Watermark Space: Inspect the white border area surrounding the portrait watermark. Look for microscopic lettering reading "USA 100" running vertically along the edge.
  3. Golden Feather Inkwell Border: Inspect the quill pen graphic behind the inkwell for microscopic line patterns reading "ONE HUNDRED USA" along the length of the feather stem.

Pro-Tip: Counterfeit microprinting typically appears as broken dots, blurry solid black lines, or illegible bleeding text under 10x magnification. On genuine notes, every character is razor-sharp with clean, squared-off strokes.



Step 5: Verify Ultraviolet Luminescence and Infrared Characteristics

To finalize forensic authentication, subject the note to non-visible light spectrum testing using long-wave UV radiation (365 nm) and optional Infrared (IR) camera viewing.



  1. Darken ambient room lighting and illuminate the front of the note with a 365 nm UV light torch.
  2. Locate the vertical security thread running to the left of the main portrait. Under 365 nm light, the entire length of the polymer thread must luminesce in a bright, vivid pink/red color.
  3. Verify that the main paper substrate does not glow blue or white. Genuine currency paper lacks chemical optical brighteners (OBAs); authentic paper remains dark/neutral under UV illumination, isolating the glowing red thread.
  4. (Optional IR Inspection) Under infrared camera sensors operating between 850 nm and 940 nm, the main portrait and middle sections of the note's back design absorb IR light, causing two distinct white vertical stripes (blank areas) to appear on the back face of the note under digital monitoring.

A photo illustration of US 100 dollar bills on American flag. Selective ...

A photo illustration of US 100 dollar bills on American flag. Selective ...

Design Series & Physical Security Specifications Matrix

The physical security architecture of the 100 dollar bill evolved across three major production eras over the last thirty years. The technical parameters in the following table detail the distinct security mechanisms across design generations.



Feature / Metric Category Pre-1996 Series (Small Head) 1996–2003A Series (Big Head) Series 2009–Present (NexGen 3D)
Portrait Design Oval frame, small Benjamin Franklin portrait Enlarged, off-center portrait without oval frame Large borderless portrait, softened shoulder lines
Color-Shifting Ink None Lower right "100" numeral shifts green to black Numeral "100" and Inkwell Bell shift copper to green
3D Security Ribbon Not present Not present Blue woven 3D ribbon with dynamic moving bells/100s
Microprinting Locations Oval portrait frame ("UNITED STATES OF AMERICA") Lower left numeral "100", jacket collar ("USA 100") Lapel collar, watermark perimeter, quill pen border
UV Security Thread Red fluorescence (introduced in Series 1990) Red/Pink fluorescence to the left of portrait Red/Pink fluorescence (left of portrait, visible both sides)
Paper Substrate Composition 75% Cotton / 25% Linen, embedded red/blue fibers 75% Cotton / 25% Linen, embedded red/blue fibers 75% Cotton / 25% Linen with woven polymer 3D ribbon
Paper Thickness Benchmark ~0.0043 in (0.1092 mm) ~0.0043 in (0.1092 mm) ~0.0043 in (0.1092 mm) (Slightly thicker at 3D ribbon)

Field Verification Complications and Counterfeit Detection Diagnostics

Even experienced financial operators encounter confusing physical anomalies when handling high volumes of currency. The following diagnostic guide details real-world authentication failures, root cause analysis, and field fixes.



Scenario 1: Note Fails Paper UV Test (Whole Bill Glows Bright Blue/White)



  • Root Cause: The bill was accidentally washed in standard laundry detergent containing Optical Brightening Agents (OBAs), or it is a counterfeit printed on commercial bleached wood-pulp paper.
  • Actionable Fix: Inspect the internal UV thread. If the paper glows blindingly white under 365 nm UV light, but the vertical thread does not glow pink/red, reject the note immediately as a fake. If the thread glows strong pink/red despite faint paper fluorescence caused by soap contamination, perform a high-magnification microprinting check to confirm authenticity.


Scenario 2: Watermark Matches Portrait, But 3D Ribbon Is Flat or Missing



  • Root Cause: "Supernote" alteration or bleached note counterfeit. Fraudsters bleach low-denomination genuine bills (such as $5 bills) to retain true currency paper, then overprint $100 graphic artwork onto the substrate.
  • Actionable Fix: Check the watermark character. Bleached $5 bills retain Abraham Lincoln's watermark instead of Benjamin Franklin's portrait watermark. Furthermore, look at the security thread position: a bleached $5 note's thread glows blue and sits on the right side of the bill, whereas a genuine $100 thread glows pink/red and sits on the left side.


Scenario 3: Color-Shifting Ink on Lower Right Numeral Does Not Change Color



  • Root Cause: Counterfeiters used standard metallic gold/copper paint or commercial foil stamping instead of proprietary Optically Variable Ink (OVI) supplied by SICPA.
  • Actionable Fix: Rotate the bill slowly through a 90-degree arc under direct light. Genuine OVI must transition smoothly from a rich metallic copper to a distinct forest green. If the color remains static metallic copper, yellow-gold, or brown at every angle, classify the bill as counterfeit.


Scenario 4: Extreme Paper Wear or Smooth Texture (Worn Intaglio)



  • Root Cause: Heavy circulation, moisture exposure, or intentional crumpling by counterfeiters attempting to disguise flat laser-printed paper.
  • Actionable Fix: Rely on non-tactile physical security barriers. Measure the bill's physical width and length against a known genuine bill (standard length: 6.14 inches / 156 mm; width: 2.61 inches / 66.3 mm). Inspect the 3D ribbon motion under magnification and check for micro-printed text inside the lapel collar. Intaglio ink may flatten, but microprinted characters and woven ribbon features remain intact.

Frequently Asked Questions



Who is featured on the 100 dollar American bill, and why?

Benjamin Franklin is featured on the front of the $100 bill. He was selected by the U.S. Treasury due to his pivotal role as a Founding Father, diplomat, scientist, and signatory of both the Declaration of Independence and the United States Constitution.



What color does the security thread glow on a real $100 bill under UV light?

The security thread embedded in a genuine $100 bill glows bright pinkish-red when exposed to long-wave ultraviolet light at a 365 nanometer wavelength. It is located to the left of Benjamin Franklin's main portrait and is visible from both sides of the bill.



Are older series $100 bills (pre-1996) still legal tender and valid?

Yes, all design iterations of United States currency remain legal tender for all debts, public charges, and dues, regardless of their production year. Older pre-1996 notes lack the modern 3D ribbon and dual color-shifting ink, but still contain embedded cotton/linen security fibers and Intaglio raised printing.



How can small business owners quickly check a $100 bill without expensive equipment?

Perform the three-point quick check: feel Benjamin Franklin’s shoulder for heavy raised ink, tilt the note to watch the copper bell inside the inkwell change to green, and look at the blue 3D ribbon to verify that the internal bells and "100" numerals shift dynamically in opposition to your tilt direction.

Standardize Your Currency Verification Protocols

Implementing automated multi-spectrum validation equipment protects commercial enterprises from financial losses caused by counterfeit currency notes. Ensure all cash-handling personnel undergo structured forensic training using standardized UV light sources and high-magnification verification tools.


100 us dollar bill hi-res stock photography and images - Alamy

100 us dollar bill hi-res stock photography and images - Alamy

Read also: Shed Ventilation 2 0 Meet The Solar Powered Fan Thats Rewriting The Rules